News – Page 730 – EEJournal

GLOBALFOUNDRIES and Cadence Add Machine Learning Capabilities to DFM Signoff for GF’s Most Advanced FinFET Solutions

March 23, 2021

Highlights:
Cadence Litho Physical Analyzer with ML technology qualified for GF 12LP/12LP+ solutions, providing up to 33% greater detection efficiency with less than 10% runtime impact
Collaboration between Cadence and GF enables signoff engineers to speed production of chip designs on GF’s 12LP and 12LP+ solutions for the AI, data center, hyperscale, aerospace and industrial markets

SAN JOSE and SANTA CLARA, Calif., March 23, 2021—GLOBALFOUNDRIES® (GF®), the world’s leading specialty foundry, and Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced a collaboration to facilitate design for manufacturing (DFM) signoff with machine learning (ML) prediction capabilities. … Read More → "GLOBALFOUNDRIES and Cadence Add Machine Learning Capabilities to DFM Signoff for GF’s Most Advanced FinFET Solutions"

RTI Introduces RTI Academy: A Virtual On-Demand Learning Platform for Software Developers and Architects of Autonomous Systems

In-Depth Training Content that Allows for Scalability, Flexibility and Increased Efficiency Across Development Teams

March 23, 2021

SUNNYVALE, Calif.– March 23, 2021 —Real-Time Innovations (RTI), the largest software framework company for autonomous systems, today announced RTI Academy, an on-demand, virtual learning platform that provides RTI customers access to Read More → "RTI Introduces RTI Academy: A Virtual On-Demand Learning Platform for Software Developers and Architects of Autonomous Systems"

Mouser Electronics Stocking Wide Portfolio of TE Connectivity Solutions

March 23, 2021

March 22, 2021 – Mouser Electronics, Inc., the industry’s leading New Product Introduction (NPI) distributor, is an authorized global distributor of solutions from TE Connectivity (TE), a world leader in connectivity and sensors. With over 69,000 TE products, Mouser offers an ever-broadening selection of the newest TE interconnect, passive, and sensor solutions, constantly adding new products.

The following are just a … Read More → "Mouser Electronics Stocking Wide Portfolio of TE Connectivity Solutions"

Isolated Gate Driver from STMicroelectronics Safely Controls Silicon-Carbide MOSFETs

March 23, 2021

Geneva, March 18, 2021 – Joining STMicroelectronics’ STGAP family of isolated gate drivers, the STGAP2SiCS is optimized for safe control of silicon carbide (SiC) MOSFETs and operates from a high-voltage rail up to 1200V.

Capable of producing a gate-driving voltage up to 26V, the STGAP2 … Read More → "Isolated Gate Driver from STMicroelectronics Safely Controls Silicon-Carbide MOSFETs"

Professional SBC User Survey launched by Newark

Respondents can win one of three $500 Amazon gift cards.

March 22, 2021

Chicago – March 22, 2020: Newark, an Avnet Company and global distributor of electronic components, products and solutions, has today launched a new global survey to understand how single board computers (SBCs) such as Raspberry Pi, Arduino and BeagleBone are being used in professional design to speed up product development and reduce time to market. The survey provides an opportunity for product designers, system engineers and makers to share insights about … Read More → "Professional SBC User Survey launched by Newark"

Maxim Integrated Synchronous DC-DC Inverting Converters Reduce Component Count by Half for Industrial Automation and Signal Conditioning Solutions

Integrated level-shifters cut board space by 72 percent, energy loss by 35 percent and improve voltage transient protection via the industry’s widest input voltage range from 4.5V to 60V

March 22, 2021

SAN JOSE, Calif.—March 22, 2021—The MAX17577 and MAX17578 from Maxim Integrated Products, Inc. (NASDAQ: MXIM) are the industry’s smallest, highest-efficiency synchronous inverting DC-DC step-down converters. As Maxim’s first 60V inverting DC-DC converters with integrated level shifters, these devices save up to 72 percent of board space by reducing component count by half while using 35 percent less energy than the closest competitive solutions. Both ICs reduce size, heat, and cost, while simplifying the design of negative output voltage rails needed for analog signals within intelligent IoT devices found in factory automation, building automation and communications systems.

< … Read More →

Pasternack Launches New 5G Omni, Rubber Duck, and In-Building Dome Antennas

New Antenna Line Supports Sub-6 GHz 5G Wireless Applications

March 22, 2021

IRVINE, Calif. – Pasternack, an Infinite Electronics brand and a leading provider of RF, microwave and millimeter wave products, has just launched a new series of Omni, rubber duck and dome antennas to address a wide range of Sub-6 GHz 5G wireless applications.

Pasternack’s Read More → "Pasternack Launches New 5G Omni, Rubber Duck, and In-Building Dome Antennas"

Bridgetek Introduces New Evaluation Hardware for Advanced EVE Graphic Controllers

March 22, 2021

18th March 2021 – To assist with the initial development and prototyping of human machine interfaces (HMIs) based on its object-oriented graphic controller ICs, Bridgetek has announced availability of the ME817EV evaluation board. Featuring the company’s BT817 embedded video engine (EVE) device, it allows engineers to experiment with the latest generation of EVE technology and get a comprehensive understanding of the breadth of its capabilities. Thanks to the higher resolutions and large format displays that the BT817 supports, more compelling … Read More → "Bridgetek Introduces New Evaluation Hardware for Advanced EVE Graphic Controllers"

Highly Integrated, Galvanically Isolated Sigma-Delta Modulators from STMicroelectronics Boost Accuracy and Reliability

March 22, 2021

Geneva, March 22, 2021 – The STMicroelectronics ISOSD61 and Read More → "Highly Integrated, Galvanically Isolated Sigma-Delta Modulators from STMicroelectronics Boost Accuracy and Reliability"

Enhanced High-speed Connector from Amphenol Supports 10Gb/s Data Transmission

Max-M12 ideal for high-speed transmission in unforgiving environments

March 19, 2021

Technical Specifications

X coding, high-speed connector with support for 10 Gb/s
S coding for a safer connection
Endures extreme temperatures ranging from -55˚C to 125˚C
Current rating of 4A
IP67
Can withstand up to 240 hours of salt spray
Ideal for high-speed data transmission

Endicott, N.Y. March 2021 – Amphenol Industrial Operations, a global leader in interconnect systems, has enhanced its Max-M12 product line to include an X coding, Read More → "Enhanced High-speed Connector from Amphenol Supports 10Gb/s Data Transmission"