News – Page 1336 – EEJournal

Temperature Logger Monitors Longer Sessions without Compromising Data Sample Rate

June 6, 2016

San Jose, CA—June 6, 2016—Monitoring cold chain and other temperature sensitive products or processes for longer duration sessions is now possible with the DS1925 iButton data logger from Maxim Integrated Products, Inc. (NASDAQ: MXIM).

Temperature sensitive products and processes can be damaged when exposed to temperatures that are too high or too low. Previously, companies could only retrieve 16KB of data for each session of critical temperature monitoring, and would … Read More → "Temperature Logger Monitors Longer Sessions without Compromising Data Sample Rate"

Imec, Holst Centre and Methods2Business Develop Complete Low-Power Wi-Fi HaLow Radio Solution for Internet of Things (IoT) Applications

June 6, 2016

Leuven (Belgium) and Eindhoven (the Netherlands) – June 6, 2016 – At this week’s Design Automation Conference (DAC 2016), nanoelectronics research center imec, Holst Centre (initiated by imec and TNO), and Wi-Fi IP provider Methods2Bussiness will present a complete Wi-Fi ® HaLowTM radio solution. The new low-power, long-range radio solution uses 10 times less power than state-of-the-art orthogonal frequency division multiplexing (OFDM) radio solutions on the market. It can be used for a broad range of applications related to the Internet of Things (IoT) and complies with the most recent wireless networking protocol, IEEE 802.11 … Read More → "Imec, Holst Centre and Methods2Business Develop Complete Low-Power Wi-Fi HaLow Radio Solution for Internet of Things (IoT) Applications"

ARM Extends Solutions for Custom SoC development in Embedded and IoT Markets

June 6, 2016

Cambridge, UK, June 6, 2016 – ARM has expanded its ARM^® DesignStart™ initiative to offer simplified and expedited access to EDA tooling and design environments from Cadence and Mentor Graphics. The new partnership, announced at DAC 2016, builds on the benefits of free access to ARM Cortex^®-M0 processor IP offered through the DesignStart portal. The new ARM Approved Design Partner program also provides DesignStart users with a global list of audited design houses for … Read More → "ARM Extends Solutions for Custom SoC development in Embedded and IoT Markets"

New Time-of-Flight Ranging Sensor from STMicroelectronics Boosts Range and Speed, in Industry’s Smallest Footprint

June 6, 2016

Geneva, June 6, 2016 – STMicroelectronics has further enhanced its leadership in Time-of-Flight (ToF) ranging sensors with the second generation of its FlightSense™ technology, now available in the new VL53L0X laser-ranging sensor.

Cadence Expands Collaboration with ARM to Accelerate Custom SoC and IoT System Designs with Industry’s First End-to-End Hosted Design Solution

June 6, 2016

SAN JOSE, Calif., June 6, 2016— Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced the industry’s first complete hosted end-to-end solution to enable designers to accelerate their custom SoC and Internet of Things (IoT) design process using ARM Cortex®-M processors. This offering accelerates mixed-signal SoC design for IoT, incorporating the ARM IoT Subsystem for Cortex-M processors and Cadence’s interface IP and unified mixed-signal implementation solution, now optimized specifically for Cortex-M cores.

To further lower barriers to innovation, Cadence has also joined … Read More → "Cadence Expands Collaboration with ARM to Accelerate Custom SoC and IoT System Designs with Industry’s First End-to-End Hosted Design Solution"

Two-Channel, Bi-Directional Digital Isolators Reduce Space and System Complexity for Designers

June 3, 2016

San Jose, CA—June 1, 2016—Designers can save space and achieve more flexible designs with the MAX14933 and MAX14937 two-channel, bi-directional digital isolators from Maxim Integrated Products, Inc. (NASDAQ: MXIM). They transfer digital signals between circuits in both directions and provide complete galvanic isolation between two power domains, all while using fewer components to save board space.

Sondrel and UltraSoC partner to deliver ‘shift left’ for SoC projects

June 3, 2016

CAMBRIDGE, United Kingdom, and READING, United Kingdom, 3rd June 2016 — UltraSoC and Sondrel, the leading IC design services consultancy, today announce Sondrel’s … Read More → "Sondrel and UltraSoC partner to deliver ‘shift left’ for SoC projects"

Synopsys to Showcase Complete Silicon to Software Solutions at DAC 2016

June 2, 2016

MOUNTAIN VIEW, Calif., June 2, 2016 /PRNewswire/ — Synopsys, Inc. (Nasdaq: SNPS), will showcase its complete silicon to software solutions at the Design Automation Conference (DAC) 2016 in Austin, Texas, June 5 – 9, 2016. The program will include special events and presentations featuring technology experts from leading semiconductor companies, IP providers and foundries, as well as Synopsys. Topics will spotlight the best practices, tools and methodologies that are being used to design the next generation of electronics and software.

Synopsys DAC Events, Read More → "Synopsys to Showcase Complete Silicon to Software Solutions at DAC 2016"

Green Hills Software to Present and Exhibit at TU-Automotive Detroit 2016 in Novi, MI

June 2, 2016

SANTA BARBARA, CA — June 2, 2016 — Green Hills Software, the largest independent software vendor for the Internet of Things (IoT) and the largest independent vendor of embedded software, will exhibit and deliver technology presentations at TU-Automotive Detroit 2016 in Novi, MI, June 8 – 9, 2016. Green Hills Software will showcase in booth C149 its broad portfolio and forward-thinking technology for the automotive market.

Green Hills will demonstrate its latest innovations for creating and managing safety and security-critical solutions for automotive.

Samsung Foundry Closed-Loop DFM Solution Leverages Mentor Graphics Tools to Accelerate Customer Yield Ramps

June 2, 2016

Highlights:
• Samsung Foundry Closed-Loop Design for Manufacturability (DFM) solution leverages data from design, test and manufacturing to identify and classify customer product yield limiters.
• Samsung Foundry has demonstrated more than 10 percent yield gains* in products that employed this innovative continuous learning solution.
• Closed-Loop DFM solution is built on Mentor® Calibre® and Tessent® platforms.

WILSONVILLE, Ore., June 1, 2016—Mentor Graphics Corp. (NASDAQ: MENT) today announced that Samsung Foundry’s Closed-Loop DFM solution uses production Mentor Calibre and Tessent platforms to accelerate customer yield ramps. A successful yield … Read More → "Samsung Foundry Closed-Loop DFM Solution Leverages Mentor Graphics Tools to Accelerate Customer Yield Ramps"