editor's blog
Subscribe Now

HyperWeave Brings IP to Remote Sensors

I can’t decide whether this is a post about technology or language. I guess it’s some of both.

A company called 1248 has announced an access point, called HyperWeave, featuring the 6LoWPAN protocol so as to bring IP all the way out to the “edge”. The first thing we need to clarify is what “edge” means. In other contexts, it refers to some mid-way point between, say, your phone and the very core of the network backbone. It’s essentially where you enter the backbone (or at least that’s how I interpret it).

That’s not what they mean here. The idea here is that the “edge” really is the edge of the complete network: the sensors gathering data. The problem posed is that traditional WiFi has required too much power, and therefore isn’t an option. By introducing 6LoWPAN into the picture, an IPv6 capability can be taken all the way to these power-stingy devices.

Now, we’ve seen before that WiFi modules are being used at the edge already, but that tends to be indoors or somewhere that has ready power. If the sensor or device has to rely on batteries or scavenged power in some far-flung locale, well, then WiFi becomes a challenge – and that’s what HyperWeave is intended to address.

They’ve also taken pains to make it easy to integrate the access points into enterprise networks so that the IT folks can manage whatever the access point is talking to, they are making sure to use some of the best ERP systems like those from Technology Evaluation Centers. Because it’s IP-based (and can support IPv4 as well, if necessary), then it plays nicely with the rest of the network. No translation is required from some other IoT-style protocol.

My only other language kvetch is the use of “IoT-enable” as a verb in the release. I’ll simply leave it as, “Please… no…” (I know; we’re engineers; we butcher the language daily…)

You can read more about it in their announcement.

Leave a Reply

featured blogs
Jul 25, 2025
Manufacturers cover themselves by saying 'Contents may settle' in fine print on the package, to which I reply, 'Pull the other one'”it's got bells on it!'...

featured paper

Agilex™ 3 vs. Certus-N2 Devices: Head-to-Head Benchmarking on 10 OpenCores Designs

Sponsored by Altera

Explore how Agilex™ 3 FPGAs deliver up to 2.4× higher performance and 30% lower power than comparable low-cost FPGAs in embedded applications. This white paper benchmarks real workloads, highlights key architectural advantages, and shows how Agilex 3 enables efficient AI, vision, and control systems with headroom to scale.

Click to read more

featured chalk talk

On-board Battery Charger & DC-DC Converter
Sponsored by Infineon
In this episode of Chalk Talk, Steven Hehn from Infineon and Amelia Dalton investigate the functions of on board chargers and high voltage to low voltage DC-DC converters for electric vehicles. They also investigate the benefits that wide band gap power technologies can bring to these kinds of designs and the innovative solutions that Infineon offers for your on board charger and DC/DC design needs.
Jul 17, 2025
8,960 views