feature article
Subscribe Now

CEVA and Gennum’s Snowbush IP Group Partner to Deliver Complete SAS 2.0 IP Solution for Embedded Storage Applications

SAN JOSE, Calif. – December 14 2009 – CEVA, Inc. [(NASDAQ: CEVA); (LSE: CVA)], a leading licensor of silicon intellectual property (SIP) platform solutions and DSP cores, and Gennum Corporation’s (TSX: GND) Snowbush IP Group (Snowbush) today announced that they have partnered to deliver a complete Serial Attached SCSI (SAS) 2.0 IP solution optimized for embedded storage applications. The integrated offering combines Snowbush silicon-proven 6.0Gbps PHY IP integrated with CEVA’s SAS 2.0 Controller IP, offering the industry’s most mature and feature rich SAS 2.0 IP solution.

With ever-increasing requirements for higher performance and higher reliability, the enterprise storage industry is rapidly evolving from parallel SCSI to Serial Attached SCSI. SAS 2.0, which doubles the line rate to 6Gbps compared to the previous generation, has now become the preferred choice for new SAS products designs. By offering a complete, licensable SAS 2.0 solution, CEVA and Snowbush are uniquely positioned to exploit the growing demand for embeddable SAS 2.0 IP, particularly for Solid State Drive (SSD) applications, where CEVA and Snowbush have extensive experience.

“Since the inception of the SATA and SAS standards, both CEVA and Snowbush have been industry leaders in serial storage IP, offering customers the best solutions available. Snowbush is excited to partner with CEVA to deliver a leading-edge SAS 2.0 solution,” said Ewald Liess, General Manager of the Snowbush IP Group for Gennum. “By integrating best-of-breed technologies from both companies, we can offer a complete PHY plus Controller SAS 2.0 IP solution to our customers, further shortening the time to market for SAS 2.0 products.”

“SAS-enabled storage solutions are one of the biggest drivers for the enterprise storage industry and we have worked closely with Snowbush’s Storage IP Group to ensure our customers have access to a complete and fully integrated SAS 2.0 IP solution,” said Aviv Malinovitch, vice president, operations at CEVA. “In particular, the rich feature suite and flexibility of our complete SAS offering is ideal for deployment in embedded SSD controllers, removing the need for discrete bridge chips and thereby increasing performance and reducing overall cost for SAS-enabled SSD designs.”

The CEVA-SAS 2.0 Controller IP provides both Target and Initiator functionality. Suitable for narrow or wide port implementations for 6.0/3.0/1.5Gbps data rates, it supports many enterprise level features including SCSI SBC-2 End-to-End Protection (DIF) and high performance, full duplex DMA with IEEE 1212.1 Scatter/Gather. Reflecting the system complexities of SAS, it provides a comprehensive configuration, control and alarm / status monitoring interface with extensive metric counters and error injection facilities. With complete programmable control for Vendor Specific features, the CEVA-SAS 2.0 Controller IP enables customers to create highly differentiated and robust SAS 2.0 products.

The Snowbush-SAS PHY IP is designed for easy integration into SoC designs for storage applications in process geometries ranging from 130nm down to 40nm. The Snowbush-SAS PHY’s programmable high-swing transmit driver can produce 1.8V p-p output swings, exceeding the SAS-2 specification requirements for maximum peak-to-peak voltage. The advanced TX equalization provides up to 12dB of pre-emphasis, and includes independent control of pre-cursor and post-cursor levels. Built-in spread spectrum clock (SSC) generation supports down-spreading and center-spreading for maximum flexibility without the need for an external SSC clock source. Enhanced receiver equalization, including an auto-calibrating continuous time linear equalizer (CTLE) and decision feedback equalization (DFE), are included to meet the demands of lossy SAS-2 backplanes. Snowbush-SAS PHY is silicon proven in volume production and Snowbush offers expert integration support enabling customers to meet their market and product differentiation goals.

Information and further details of about each part of the SAS Controller to SAS PHY solution are available from the respective vendors. Contact CEVA at sales@ceva-dsp.com. Contact Snowbush IP atsales@snowbush.com.

About CEVA, Inc. 
Headquartered in San Jose, Calif., CEVA is a leading licensor of silicon intellectual property (SIP) DSP Cores and platform solutions for the mobile handset, portable and consumer electronics markets. CEVA’s IP portfolio includes comprehensive solutions for multimedia, audio, voice over packet (VoP), Bluetooth and SATA/SAS serial storage, and a wide range of programmable DSP cores and subsystems with different price/performance metrics serving multiple markets. In 2008, CEVA’s IP was shipped in over 300 million devices. For more information, visit www.ceva-dsp.com

About the Gennum Snowbush IP Group 
The Gennum Snowbush IP group offers a team of interconnect specialists to design and deliver silicon-proven, high-speed serial interface IP. Comprising one of the industry’s most robust, widely-deployed, production-tested and customizable family of IP cores, the Snowbush IP portfolio satisfies the needs of today’s most demanding high-speed serial communication protocols and applications. Snowbush IP offers integrated PHY and Controller solutions for standards like USB, PCI Express® and Serial ATA (SATA), and single and multistandard SerDes for applications with data rates from 1 Gb/s to over 10 Gb/s. Gennum’s Snowbush IP group is committed to supporting customers with diverse foundry and process requirements, offering IP cores for TSMC, UMC, Common Platform, and Fujitsu processes. For more information visit www.snowbush.com.

Leave a Reply

True Power & Current Monitor Enables Board & System-Level Optimization

MILPITAS, CA – December 14, 2009 – Linear Technology Corporation introduces the LT2940, a power and current monitor for 4V to 80V systems. The LT2940 provides the necessary circuits to accurately measure, monitor and control power in situations where both the current and voltage may vary due to supply voltage uncertainty, component parametric changes, transient conditions or time-varying signals. Unlike traditional power monitors that rely on data converters and multiplying registers to calculate power, the LT2940 uses a true four-quadrant analog multiplier that results in 5% power measurement accuracy and 3% current measurement accuracy, ensuring that boards and systems achieve optimum power efficiency and reliability. The LT2940 is suitable for use in line cards and servers, power-sense circuit breakers, power control loops and a wide variety of metering applications.

The LT2940 measures a high-side current and differential voltage, and calculates the instantaneous power at a bandwidth exceeding 500kHz. Bidirectional high-side currents and bipolar voltage differences are correctly handled by a four-quadrant multiplier and push-pull output stage, which allow the device to indicate forward and reverse power flow. After current and voltage measurements are taken, current and power levels can be scaled, filtered and monitored separately via their respective proportional-to-current and proportional-to-power current outputs. Meanwhile, an integrated comparator with complementary open-collector outputs can be used to create PWM control loops, or provide simple logic of, for example, an over-power pin, an LED indicator alarm, a MOSFET load cutoff switch, an external fan, or a binary counter for metering applications. Together, the wide supply range, wide bandwidth and uncompromised accuracy make the LT2940 a complete versatile power monitoring solution.

The LT2940 is offered in commercial and industrial versions, supporting operating temperature ranges from 0ºC to 70ºC and -40ºC to 85ºC, respectively. The LT2940 is available today in RoHS compliant, 12-pin 3mm x 3mm DFN and 12-lead MSOP packages. Pricing starts at $2.05 each in 1,000 piece quantities. Please visit www.linear.com for more product selection and information.

Summary of Features: LT2940

  • Four-Quadrant Power Measurement
  • Power Measurement Accuracy 5%
  • 4V to 80V High-Side Sense, 100V max
  • Current Mode Power & Current Outputs
  • Output Bandwidth Exceeds 500kHz
  • Current Measurement Accuracy 3%
  • 6V to 80V Supply Range, 100V max.
  • Inverting & Non-Inverting Open-Collector
  • Comparator Outputs
  • Available in 12-pin 3mm x 3mm DFN & 12-Lead MSOP Packages

About Linear Technology

Linear Technology Corporation, a manufacturer of high performance linear integrated circuits, was founded in 1981, became a public company in 1986 and joined the S&P 500 index of major public companies in 2000. Linear Technology products include high performance amplifiers, comparators, voltage references, monolithic filters, linear regulators, DC-DC converters, battery chargers, data converters, communications interface circuits, RF signal conditioning circuits, µModule® products, and many other analog functions. Applications for Linear Technology’s high performance circuits include telecommunications, cellular telephones, networking products such as optical switches, notebook and desktop computers, computer peripherals, video/multimedia, industrial instrumentation, security monitoring devices, high-end consumer products such as digital cameras and MP3 players, complex medical devices, automotive electronics, factory automation, process control, and military and space systems.

Leave a Reply

featured blogs
Aug 11, 2025
If you're like me, all three of these videos will leave your brain buzzing with ideas, thoughts, and unanswered questions....

Libby's Lab

Libby's Lab Scopes out Phoenix Contact Trio 3 Power Supplies

Sponsored by Mouser Electronics and Phoenix Contact

Join Libby and Demo in this episode of “Libby’s Lab” as they explore the Phoenix Contact Trio 3 Power Supplies, available at Mouser.com! These DIN-rail power supplies are great for providing solid, stable power in a variety of applications. Keep your circuits charged and your ideas sparking!

Click here for more information about Phoenix Contact TRIO 3 One-/Three-Phase & Coated Power Supplies

featured chalk talk

Reliability: Basics & Grades
Reliability is cornerstone to all electronic designs today, but how reliability is implemented and determined can vary widely by different market segments. In this episode of Chalk Talk, Amelia Dalton and Sam Accardo from the YAGEO Group explore the definition of reliability for electronic components, investigate the different grades of reliability offered by the YAGEO Group and the various steps that the YAGEO Group is taking to ensure the greatest reliability of their components.
Aug 15, 2024
53,615 views