industry news
Subscribe Now

X-FAB Doubles 6-Inch SiC Foundry Capacity in Response to Customer Demand

Tessenderlo, Belgium – August 30, 2018  — X-FAB Silicon Foundries SE, the leading analog/mixed-signal and specialty foundry group, today announced plans to double their 6-inch Silicon Carbide (SiC) process capacity at its fab in Lubbock, Texas in response to increased customer demand for high efficiency power semiconductor devices.

In preparation for doubling capacity, X-FAB Texas has purchased a second heated ion implanter for use in manufacturing 6-inch SiC wafers. Delivery of this heated ion implanter is expected by the end of 2018, and production release is planned during the first quarter of 2019 in time to meet projected near-term demand.

X-FAB was the first wafer foundry to offer SiC manufacturing on 6-inch wafers. This doubling of X-FAB’s SiC process capacity furthers its strategy to remain the premier 6-inch SiC wafer foundry, and demonstrates the Company’s commitment to SiC technology and the SiC foundry business model.

Advantages of X-FAB’s 6-inch SiC process capabilities for power semiconductors include superior high voltage operation, significantly lower transistor On-resistance, significantly lower transmission and switching losses, extended high temperature operation as high as 400°F/204°C, higher thermal conductivity, very high frequency operation, and lower parasitic capacitance. X-FAB’s SiC process capabilities allow customers to realize high efficiency power semiconductor devices including high power MOSFETs, JFETs, and Schottky diodes.

Systems with SiC power devices benefit from reduced system size and weight, and because they dissipate less heat are significantly more efficient compared to similar power semiconductor technologies. These features are important for switching power supplies and power converters found in electric vehicles (EVs), wind turbines, and solar converters. High temperature operation improves reliability, especially in hot industrial applications such as aircraft, EV racecars, and train locomotives. Reduced system size and weight is important in portable medical equipment and Hybrid EVs (PHEVs).

According to Lloyd Whetzel, CEO of X-FAB Texas, “With the rising popularity of SiC we understood, early on, that increasing our ion implant capability would be critical to our continued manufacturing success in the SiC marketplace. This is just the first step in our overall capital plan for SiC-specific manufacturing process improvements. This step also enables X-FAB to demonstrate our commitment to the SiC industry and maintains our leadership position in the SiC foundry business.”

X-FAB’s 6-inch SiC process capabilities are available at its Lubbock, Texas manufacturing site which is  certified for automotive manufacturing according to the new IATF-16949:2016 International Automotive Quality Management System (QMS).

For more information on X-FAB’s SiC process capabilities, contact your X-FAB representative or meet up with X-FAB’s silicon carbide experts at booth C8 at the European Conference on Silicon Carbide and Related Materials (ECSCRM 2018) in Birmingham U.K..

About X-FAB
X-FAB is the leading analog/mixed-signal and MEMS foundry group manufacturing silicon wafers for automotive, industrial, consumer, medical and other applications. Its customers worldwide benefit from the highest quality standards, manufacturing excellence and innovative solutions by using X-FAB’s modular CMOS and SOI processes in geometries ranging from 1.0 to 0.13 µm, and its special SiC and MEMS long-lifetime processes. X-FAB’s analog-digital integrated circuits (mixed-signal ICs), sensors and micro-electro-mechanical systems (MEMS) are manufactured at six production facilities in Germany, France, Malaysia and the U.S. X-FAB employs about 4,000 people worldwide. For more information, please visit www.xfab.com

Leave a Reply

featured blogs
Mar 29, 2024
By Mark Williams, Sr Software Engineering Group Director Translator: Masaru Yasukawa 差動アンプはã1つの入力信号ではなく2つの入力信号間の差にゲインをé...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Autonomous Robotics Connectivity Solutions
Sponsored by Mouser Electronics and Samtec
Connectivity solutions for autonomous robotic applications need to include a variety of orientations, stack heights, and contact systems. In this episode of Chalk Talk, Amelia Dalton and Matthew Burns from Samtec explore trends in autonomous robotic connectivity solutions and the benefits that Samtec interconnect solutions bring to these applications.
Jan 22, 2024
9,470 views