industry news
Subscribe Now

Ventec highlights advanced Ultra-Low Dk PCB Materials at DesignCon 2018

January 08, 2018 – Ventec International, a world leader in the production of polyimide & high reliability epoxy laminates and prepregs, will showcase its extensive range of tec-speed© materials for high-speed low-loss applications including the latest tec-speed© 10 ultra-low dk material at DesignCon 2018 show in Santa Clara, CA, USA from 30th January to 1st February on booth #118. A further highlight will be a next generation best-in-class, thermally conductive (8 X FR4) high Tg thin-core and prepreg material (VT-5A2) ideal for hybrid multilayer low-loss constructions.

Ventec will be exhibiting at DesignCon 2018, the premier conference for chip, board, and systems design engineers, on booth #118 highlighting it’s tec-speed© range of PCB materials for high-speed low-loss applications. By using an ultra-low Dk material with Dk values between 2.3 and 2.8 lower losses, lower system power requirements and with it the delicate balance of performance and cost can be achieved. Higher layer counts on backplanes, daughter cards and hand-held’s are made possible in a smaller footprint by having smaller layer to layer separation without sacrificing trace width.

“Maintaining wider traces produces lower resistance in the signal path” said Martin Cotton, Director – OEM Technology Marketing. “Combining ultra-low Dk with a low Df of 0.003 to 0.004, produces an alternative to ever smaller traces and higher power requirements.”

Ventec’s highest performance thermally conductive laminate material so far will also make its DesignCon-debut. VT-5A2 offers a polymer matrix that is fully compatible with Ventec laminates, epoxy or polyimide based materials including tec-speed®, making it the ideal choice for the manufacture of hybrid multilayer low-loss constructions.

Ventec’s Martin Cotton (Director – OEM Technology Marketing) and Peter Koolen (Global Account Manager OEM Technology Marketing) will be on hand to offer technical advice.

Further information about Ventec’s solutions and the company’s wide variety of products, is available at www.venteclaminates.com and/or by downloading the Ventec APP.

About Ventec International
With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, visit www.venteclaminates.com.

Leave a Reply

featured blogs
Jun 20, 2018
In this week'€™s Whiteboard Wednesday, Marc Greenberg, walks us through a typical ADAS system architecture and then provides a real-life testimonial on the value of these systems. https://youtu.be/EQL4jeD25_g...
Jun 19, 2018
Blockchain. Cryptocurrencies. Bitcoin mining. Algorithmic trading. These disruptive technologies depend on high-performance computing platforms for reliable execution. The financial services industry invests billions in hardware to support the near real-time services consumer...
Jun 7, 2018
If integrating an embedded FPGA (eFPGA) into your ASIC or SoC design strikes you as odd, it shouldn'€™t. ICs have been absorbing almost every component on a circuit board for decades, starting with transistors, resistors, and capacitors '€” then progressing to gates, ALUs...
May 24, 2018
Amazon has apparently had an Echo hiccup of the sort that would give customers bad dreams. It sent a random conversation to a random contact. A couple had installed numerous Alexa-enabled devices in the home. At some point, they had a conversation '€“ as couples are wont to...
Apr 27, 2018
A sound constraint management design process helps to foster a correct-by-design approach, reduces time-to-market, and ultimately optimizes the design process'€”eliminating the undefined, error-prone methods of the past. Here are five questions to ask......