industry news
Subscribe Now

VadaTech Announces new Xeon E3 Processor AMC variants (PCIe Gen3, 10/40 GbE, SRIO Gen2)

Henderson, NV – June 19, 2017 – VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the AMC756, AMC757, AMC758 and AMC759. These are Processor AMCs (PrAMC) in AdvancedMC (AMC) form factor based on the 14nm Intel® Xeon® Processor E3-1505M v6 with CM238 PCH. The processor base frequency is 3.0 GHz with max turbo frequency of 4.0 GHz. The modules follow the AMC.1, AMC.2, AMC.3 and AMC.4 specifications as applicable and provide up to 16 GB of DDR4 memory with ECC and 64 GB of Flash for the OS. The modules have Serial over LAN (SoL).  The BIOS allows booting from on-board Flash, off-board SATA, PXE boot and USB. There are dual USB 3.0 type C connectors for extended storage or peripherals.

AMC756, AMC757, and AMC759 are single module, mid-size AMCs providing dual GbE on ports 0/1 and SATA on ports 2/3, with GbE, dual USB 3.0 and miniDisplayPort to the front panel.  To support all major fat pipe fabric options, AMC756 provides PCIe Gen3 on 4-11, AMC757 provides 10/40GbE and AMC759 provides SRIO Gen2.

AMC758 is a double module, mid-size AMC with PCIe Gen3 on 4-11 with dual GbE (RJ-45), dual 10GbE (SFP+) and dual miniDisplayPort Dual-Mode (DP++) on the front panel.  The board provides two on-board M.2 NVMe sockets, each connected to the processor by PCIe x4 for high speed local storage.

About VadaTech

VadaTech provides innovative embedded computing solutions from board-level products, chassis-level platforms, to configurable application-ready systems. With a focus on AdvancedTCA, MicroTCA, VPX and PCIe solutions, the company offers unmatched product selection and expertise. A unique combination of electrical, mechanical, software, and system-level expertise, enables VadaTech to provide customized commercial or rugged computing solutions to meet the most complex customer requirements. VadaTech also offers specialized product solutions for VME, CompactPCI, and other architectures. A member of PICMG and VITA, VadaTech has headquarters, design and manufacturing facilities in Henderson, NV with design, support and sales offices in Europe and Asia Pacific.

Leave a Reply

featured blogs
Jul 17, 2018
In the first installment, I wrote about why I had to visit Japan in 1983, and the semiconductor stuff I did there. Today, it's all the other stuff. Japanese Food When I went on this first trip to Japan, Japanese food was not common in the US (and had been non-existent in...
Jul 16, 2018
Each instance of an Achronix Speedcore eFPGA in your ASIC or SoC design must be configured after the system powers up because Speedcore eFPGAs employ nonvolatile SRAM technology to store the eFPGA'€™s configuration bits. Each Speedcore instance contains its own FPGA configu...
Jul 12, 2018
A single failure of a machine due to heat can bring down an entire assembly line to halt. At the printed circuit board level, we designers need to provide the most robust solutions to keep the wheels...