industry news
Subscribe Now

Semiconductor Industry Invited to Workshop on Best Practices for Effective Digital Marketing

ESD Alliance Partners with Member Companies OneSpin Solutions, Breker Verification Systems to Host Workshop

REDWOOD CITY, Calif., April 19, 2018 (GLOBE NEWSWIRE) — The Electronic System Design Alliance will host a Digital Marketing Workshop with OneSpin Solutions and Breker Verification Systems that will outline best practices for an effective digital marketing strategy Thursday, April 26, at SEMI in Milpitas, Calif.

The workshop is designed for CEOs, marketing executives, content creators or anyone else from within the semiconductor industry interested in implementing or improving their company’s content marketing strategy.

Nicolas Athanasopoulos, OneSpin’s head of digital strategy, and Dave Kelf, chief marketing officer at Breker, both ESD Alliance member companies, will present ways to implement a web-based content and lead-nurturing plan with cost-effective and proven digital marketing techniques.

The workshop Thursday, April 26, will begin with breakfast at 7:30 a.m. and will run from 8:30 a.m. until 12:30 p.m. at SEMI, 673 South Milpitas Blvd., Milpitas, Calif.  It will consist of four sections:

  1. Introduction –– Tech marketing in the digital age
  2. Inbound –– A strategic model for digital marketing
  3. Digital Marketing –– Tactics that fit the semiconductor industry
  4. A Digital Marketing Case Study

Cost is $30 per person for ESD Alliance member companies, $75 per person for non-members. Seating is limited. Registration information can be found at: http://bit.ly/2pvDqlL

About the Electronic System Design Alliance

The Electronic System Design (ESD) Alliance, an international association of companies providing goods and services throughout the semiconductor design ecosystem, is a forum to address technical, marketing, economic and legislative issues affecting the entire industry. It acts as the central voice to communicate and promote the value of the semiconductor design industry as a vital component of the global electronics industry.

Follow the ESD Alliance:
Website: esd-alliance.org
ESD Alliance Bridging the Frontier blog: http://bit.ly/2oJUVzl
Twitter: @ESDAlliance
LinkedIn: https://www.linkedin.com/groups/8424092
Facebook: https://www.facebook.com/ESDAlliance

Leave a Reply

featured blogs
Aug 17, 2018
If you read my post Who Put the Silicon in Silicon Valley? then you know my conclusion: Let's go with Shockley. He invented the transistor, came here, hired a bunch of young PhDs, and sent them out (by accident, not design) to create the companies, that created the compa...
Aug 16, 2018
All of the little details were squared up when the check-plots came out for "final" review. Those same preliminary files were shared with the fab and assembly units and, of course, the vendors have c...
Aug 15, 2018
VITA 57.4 FMC+ Standard As an ANSI/VITA member, Samtec supports the release of the new ANSI/VITA 57.4-2018 FPGA Mezzanine Card Plus Standard. VITA 57.4, also referred to as FMC+, expands upon the I/O capabilities defined in ANSI/VITA 57.1 FMC by adding two new connectors that...
Aug 14, 2018
I worked at HP in Ft. Collins, Colorado back in the 1970s. It was a heady experience. We were designing and building early, pre-PC desktop computers and we owned the market back then. The division I worked for eventually migrated to 32-bit workstations, chased from the deskto...
Jul 30, 2018
As discussed in part 1 of this blog post, each instance of an Achronix Speedcore eFPGA in your ASIC or SoC design must be configured after the system powers up because Speedcore eFPGAs employ nonvolatile SRAM technology to store its configuration bits. The time required to pr...