industry news
Subscribe Now

Microsemi and Tamba Collaborate on New PolarFire Devices to Deliver Industry-Leading Low Power FPGA-Based 10G Ethernet Solution

Tamba’s Ethernet MAC Enables 40G Datapath Applications in Microsemi’s PolarFire FPGAs

ALISO VIEJO, Calif. —July 18, 2017—Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and Tamba Networks, a leading developer of connectivity intellectual property (IP) cores, today announced their collaboration to incorporate Tamba Networks’ Ethernet media access controller (MAC) in Microsemi’s new cost-optimized, low power, mid-range PolarFire™ field programmable gate array (FPGA) to offer industry-leading low power FPGA-based 10G Ethernet solution. Tamba Networks’ Ethernet MAC is half the area and twice the speed of competing Ethernet MACs, providing Microsemi customers with lower costs due to its size optimization in addition to the high security and unique capabilities of PolarFire FPGAs.

As part of its collaboration with Tamba Networks, Microsemi used the company’s Interlaken and 10G/40G Ethernet MAC soft cores as key building blocks to evaluate and enhance PolarFire FPGAs’ fabric architecture, with 10G and 40G datapaths running at 160 MHz and 320 MHz. These cores offer extremely low gate count and latency, with high flexibility. When combined with Microsemi’s low power fabric and low power transceiver, Tamba Networks’ 10G Ethernet soft core lowers the power of a 10G datapath by 50 percent. The device is also available as a direct core from Microsemi’s IP library.

“One of the priorities in designing PolarFire FPGAs was to offer the lowest power, cost-optimized 10Gbe solution for our customers,” said Ted Speers, head of FPGA product architecture and planning at Microsemi. “Working with Tamba Networks provided us access not only to optimal encoding modules to integrate into the device, but also its small 10G Ethernet MAC optimized for frequency and easy-to-close timing at both 160 MHZ and 320 MHz. While PolarFire FPGAs are ideal for multiple markets, the FPGA-based Ethernet solution is particularly suitable for demanding communications and defense applications.”

According to the IHS Ethernet Switch Quarterly Market Tracker, the number of 10G ports is expected to grow from 32 million ports in 2016 to over 100 million ports by the end of 2021. The Ethernet switch market was approximately 7.2 million in 2016 and is forecast to grow to 12.3 million in 2021, with 10G contributing approximately one third of all Ethernet switching revenue today.

PolarFire FPGAs are targeted at several additional applications in the communications market, including access network, network edge, metro (1-40G); mobile infrastructure, wireless backhaul, smart optical modules and video broadcasting. The devices are also well-suited to applications within the defense and aerospace market, such as encryption and root of trust, secure wireless communications, radar and electronic warfare (EW), aircraft networking, actuation and control. Ideal applications for the FPGAs within the industrial market include process control and automation, machine vision processing and analytics, programmable logic controllers, industrial networking, and video and image processing.

Microsemi’s PolarFire FPGAs are particularly beneficial to the access segment of the communications infrastructure market, where original equipment manufacturers (OEMs) are working to deliver more bandwidth to customers while reducing capital and operational expenditures. Tamba Networks was deeply involved in the development of the PolarFire transceiver’s physical coding sublayer (PCS), providing the 64b66b/64b67b encoding modules used for Ethernet and Interlaken. In addition, the company helped Microsemi modify the 64b66b encoder to operate with deterministic latency, ensuring support for Common Public Radio Interface (CPRI) options 7b, 8 and 9.

“We were pleased to collaborate with Microsemi on its mid-range PolarFire FPGAs by providing the industry’s lowest latency, power and size solution for Ethernet MAC and PCS cores as well as Interlaken communication protocols to help differentiate these devices,” said Soren Pederson, president of Tamba Networks. “Being intimately involved in the development of PolarFire’s hard PCS layer resulted in a unique 10Gbe solution providing the power efficiency, compact size and deterministic latency necessary for Microsemi customers’ growing application requirements.”

Microsemi’s PolarFire FPGAs, launched in February, are designed to rethink how the industry has traditionally viewed FPGAs with mid-range densities, as the devices are the first non-volatile FPGAs providing more power and cost savings in comparison to SRAM FPGA solutions with 10G transceivers, advanced input/output (I/O), high security and digital signal processor (DSP) capabilities. Microsemi also sells a comprehensive portfolio of Ethernet switches and PHYs, which customers can use to add switching functionality and/or MAC-layer security (MACsec) encryption with nanosecond IEEE1588 timestamping capabilities to PolarFire designs.

Microsemi’s PolarFire FPGAs with Tamba Networks’ Ethernet MAC are available now. For more information, visit and or email

About PolarFire FPGAs
Microsemi’s new cost-optimized PolarFire FPGAs deliver the industry’s lowest power at mid-range densities with exceptional security and reliability. The product family features 12.7 Gbps Serializer/Deserializer (SerDes) transceivers at up to 50 percent lower power than competing FPGAs. Densities span from 100K to 500K logic elements (LEs) and are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industry 4.0 which includes the industrial automation and Internet of Things (IoT) markets.

PolarFire FPGAs’ transceivers can support multiple serial protocols, making the products ideal for communications applications with 10Gbps Ethernet, CPRI, JESD204B, Interlaken and PCIe. In addition, the ability to implement serial gigabit Ethernet (SGMII) on general purpose input/output (GPIO) enables numerous 1Gbps Ethernet links to be supported. PolarFire FPGAs also contain the most hardened security IP to protect customer designs, data and supply chain. The non-volatile PolarFire product family consumes 10 times less static power than competitive devices and features an even lower standby power referred to as Flash*Freeze.  For more information, visit

About Tamba Networks
Tamba Networks is a leading intellectual property silicon core developer, founded in 2003, and based in Northern California, USA. Tamba Networks designs and develops the most compact, lowest latency, lowest power, and most flexible connectivity IP solutions in the world. Focus is on Ethernet and Interlaken protocols, which were originally developed for the financial industry where low latency is crucial. Tamba Networks’ ultra-low-latency IP solutions are industry-standard compliant and offer a smooth transition path to next generation networks. For more information on Tamba, visit

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at

Leave a Reply

featured blogs
Jul 16, 2018
This week it is CDNLive Japan on Friday July 20th. I will be there so obviously this will be my latest trip to Japan...but we will start by looking at my first trip to Japan. The first trip I made to Japan was in 1983. This was very early. If you have been in semiconductors o...
Jul 12, 2018
A single failure of a machine due to heat can bring down an entire assembly line to halt. At the printed circuit board level, we designers need to provide the most robust solutions to keep the wheels...
Jun 29, 2018
Once you'€™ve made the correct decision to add Speedcore eFPGA IP to your ASIC or SoC design, the next question you'€™ll need to answer is how large to make the eFPGA. That'€™s a multi-dimensional question because Speedcore eFPGAs contain many types of blocks including:...