industry news
Subscribe Now

Coilcraft Introduces XEL50xx Ultra Low-loss Power Inductors for High-frequency Applications

Cary, IL, USA – Coilcraft introduces its new XEL50xx Family of high-performance, molded power inductors that offer exceptionally low DC resistance and ultra-low AC losses, greatly improving power converter efficiency at high frequencies (2 to 5+ MHz) and high ripple current.

The use of high switching frequencies or high ripple current allows a corresponding lower inductance value, which results in a physically smaller part for the same electrical specs. XEL50xx Family inductors measure just 5.28 x 5.48 mm with a maximum height of 3.2 mm.

The XEL50xx Family is currently available in two models, the XEL5020 and XEL5030. A third model, the XEL5050 is expected late Q2 2018. The XEL5020 is available in six inductance values from 0.10 to 1.0 µH, with current ratings up to 39 Amps. The XEL5030 has 10 values from 0.13 to 4.7 µH and current ratings up to 44 Amps. All models offer soft saturation characteristics to withstand high current spikes and have no thermal aging issues.

XEL50xx Family inductors are qualified to AEC-Q200 Grade 1 standards (-40° to +125°C ambient) with a maximum part temperature of +165°C, making them suitable for automotive and other harsh-environment applications. They feature RoHS-compliant, tin-silver-over-copper terminations and are halogen free. Their composite construction also minimizes audible buzzing.

As with all Coilcraft parts, free evaluation samples of the XEL50xx Series are available online at www.coilcraft.com. For more information, contact Len Crane, +1-847-639-6400, lcrane@coilcraft.com.

About Coilcraft

Headquartered outside of Chicago in Cary, Illinois, Coilcraft is a leading global supplier of magnetic components including high performance RF chip inductors, power magnetics and filters. In addition to a large selection of standard components, Coilcraft also designs and builds custom magnetics to fit a customer’s exact electrical requirements.

Engineers and buyers consider Coilcraft a preferred supplier because of its reputation for quality, reliable delivery, engineering support and the superior performance of our products. In independent surveys, engineers consistently rank Coilcraft the number one magnetics company they would recommend to a friend.

Leave a Reply

featured blogs
Oct 17, 2018
Samtec offers one of the industry'€™s largest and most flexible lines of two-piece, pin-and-socket board-stacking interconnects. To say it another way, we have more ways to stack two or more boards together than any other connector company.  Also, you can specify a cust...
Oct 17, 2018
This week it is CDNLive Israel. But last week it was Jasper User Group (JUG). At it happens, Jasper was one of the early companies to sign up with SemiWiki when we started it, so I've been going to Jasper User Group for longer than either I've been at Cadence or Jas...
Oct 16, 2018
  IC Insights has just published the September Update to The 2018 McClean Report, and one figure (reproduced below) puts yet another nail into the coffin for poor old Moore'€™s Law. Now please take care. There'€™s a vertical line between the 200mm wafers on the left ...
Oct 12, 2018
At the end of the day, your products are only as good as their in-the-field performance. It doesn'€™t matter how well they performed in a controlled environment....