industry news
Subscribe Now

Cliff FeedThrough Connectors now offer system builders fast and simple panel assembly

Cliff Electronics is now offering system integrators a new option of their market leading range of FeedThough (FT) connectors. All models of their metal housed connector can be ordered with M3 threaded mounting holes facilitating simple panel assembly without the need for securing nuts and washers.

Cliff’s FT connectors fit in the industry standard XLR connector format 16 x 24mm mounting holes, simplify panel design and improve product aesthetics. Available in silver or black finishes the rugged metal housed connectors may now be mounted to the rear of panels with just an M3 screw and without any hardware at the rear of the panel.

The Cliff range of XLR Format Feedthrough connector range allows designers to simply integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast, lighting, audio, instrumentation and industrial applications.

Versions available include GJ45, HDMI, BNC and USB3.0 compliant single and dual USB versions in addition to the existing range which provides Analogue, Digital and Optical Feed-Through connectivity in formats including Firewire, HDMI A-A and 50 ohm BNC versions, USB2 A-to-B and B-to-A “gender change” sockets high speed USB Type – C, USB3 to USB3 in all gender changing configurations – A-A, A-B and B-A. Also available are all popular data and Ethernet connectors including USB 2.0 and 3.0, LC and SC fibre (Duplex & Simplex), UTP and FTP RJ45s in both Cat6 and Cat5e (shielded and unshielded), Toslink, RCA Phono and HDMI and blanking plates.

John Hall, Managing Director of Cliff Electronics, comments; “Our FT connector range continues to grow and find new applications. Our new threaded versions offer system builders simplicity of assembly and time savings.

Cliff threaded metal FT connectors are available black finished and silver anodized. The standard through-hole mounting versions are also available in plastic housings. Bezels are available in 7 colours to identify the function of FT connectors when fitted to a control panel.

1U, 19” rack panels pre-assembled with up to 16 FT connectors are now available to order from Cliff offering systems integrators simple system assembly, reduced manufacturing time, component count and cost.

Cliff Electronics are market leaders in the design, development and manufacture of connectors, leads, test lead sets and accessories for a wide range of markets and supply major international OEMs. As a UK manufacturer Cliff are able to respond quickly to customer’s needs for both standard products and custom designs. Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts and connection blocks, motors, fans and assembly aids. Cliff can also provide a wide range of leads including test and instrumentation, audio, instrument and power.

All versions of Cliff’s Feedthrough connectors are in full production and available direct from Cliff and via major Distributors in the UK and Europe.

For more information call +44 (0)1737 771375, email end_of_the_skype_highlightingsales@CliffUK.co.uk or visit Cliffuk.co.uk

About Cliff Electronics

CLIFF Electronic Components Limited was founded in 1977 to supply the music industry with connectors. Cliff has subsequently greatly expanded their products and services to become a high quality supplier to most professional and industrial markets. As both a manufacturer and a distributor, the expansion of their product range has established Cliff as a prime source for components. From audio into test leads and accessories, general industrial connectors, foot pedals, hand tools, production aids, lighting connectors, motors and fans. Cliff also manufactures and sources various types of leads including audio, instrument and power leads. Cliff also has extensive expertise in moulding and metalwork and can provide a design, engineering and manufacturing service for the production of customised components and assemblies. Our plastics expertise includes injection-moulding, blow-moulding, extrusion, sonic-welding and printing. Metalwork includes stamping, machining, aluminium extrusion, finishing and printing. We also have the facility to enable assembly, inspection and testing. Cliff’s UK and Far Eastern production plants are certified to ISO 9001 2000 and employ design, engineering, technical, marketing and sales personnel. Quality has always been of prime importance and the majority of CLIFF products are covered by approvals from organisations including UL and VDE.

Leave a Reply

featured blogs
Jun 17, 2018
From 7-9.05 the CDNLive circus made it stop in Munich / Germany for full three days. For Academic Network in EMEA this is the most important event through the year, as we are organizing the Academic Track and invite our academic partners to attend, participate and discuss wit...
Jun 14, 2018
Samtec has released the industry'€™s first 0.50 mm pitch edge card socket with justification beam. This design allows high-speed signals to pass through an incredibly dense connector while keeping the mating PCB at a reasonable cost. The socket'€™s justification beam is d...
Jun 7, 2018
If integrating an embedded FPGA (eFPGA) into your ASIC or SoC design strikes you as odd, it shouldn'€™t. ICs have been absorbing almost every component on a circuit board for decades, starting with transistors, resistors, and capacitors '€” then progressing to gates, ALUs...
May 24, 2018
Amazon has apparently had an Echo hiccup of the sort that would give customers bad dreams. It sent a random conversation to a random contact. A couple had installed numerous Alexa-enabled devices in the home. At some point, they had a conversation '€“ as couples are wont to...