industry news
Subscribe Now

Ametherm Glass-Encapsulated Thermistors for Automotive and Industrial Applications Now in Stock at Digi-Key

Hermetically Sealed Devices Provide Moisture Resistance, High-Temperature Operation, and Compact Size

CARSON CITY, Nev. — Nov. 20, 2017 — Ametherm today announced that its DG series of glass-encapsulated thermistors for high-accuracy temperature sensing in automotive and industrial applications is now in stock at Digi-Key. Hermetically sealed DG series devices eliminate errors in resistance readings due to moisture penetration while offering high operating temperatures and a compact size.

Ametherm’s glass-encapsulated DG series provides designers with faster, more accurate, and less expensive alternatives to thermocouples and RTD probes. DG series devices are free from limitations due to solder temperature, which enables them to offer users a wide operating temperature range of -40 °C to +300 °C. With diameters of only 1.5 mm, the devices boast a small size that allows for encapsulation in a variety of housings, such as ring lugs and hex nuts.

DG series thermistors are available in four resistance values at 25 °C — 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ — with resistance tolerances down to ±2 %, a dissipation constant of >0.5 mW/°C, and thermal time constant of <6.5 s. The devices provide temperature coefficient of resistance of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C; beta values of 3500 °K, 3950 °K, and 4200 °K; and 32 AWG dumet wire leads.

Samples and production quantities of the devices are available now, with factory lead times of six to eight weeks. Volume pricing for U.S. delivery starts at $0.41 per piece.

For more information on Ametherm’s products or to request a sample, visit www.ametherm.com. Or call 800-808-2434 (toll free in the United States) or 775-884-2434 from outside the U.S. and Canada. Follow Ametherm at the company blog, http://www.ametherm.com/blog/.

About Ametherm
Ametherm, headquartered in Carson City, Nevada, was founded in 1994 and specializes in thermistors for temperature sensing and inrush current limiting in industrial, automotive, AMS (avionics, military and space) and many other markets. Ametherm’s devices are some of the highest rated in the industry and are available in customized versions to meet the needs of specific applications. For more information, visit www.ametherm.com or call 800-808-2434.

Leave a Reply

featured blogs
Jun 22, 2018
You can't finish the board before the schematic, but you want it done pretty much right away, before marketing changes their minds again!...
Jun 22, 2018
Last time I worked for Cadence in the early 2000s, Adriaan Ligtenberg ran methodology services and, in particular, something we called Virtual CAD. The idea of Virtual CAD was to allow companies to outsource their CAD group to Cadence. In effect, we would be the CAD group for...
Jun 21, 2018
Doing business today isn’t quite like it was back in the 80’s. Sparkling teeth and x-ray vision shouldn’t be a side effect of a customer using your product. This, of course, is said in jest, but no longer do we sell only a product; but a product and physical...
Jun 7, 2018
If integrating an embedded FPGA (eFPGA) into your ASIC or SoC design strikes you as odd, it shouldn'€™t. ICs have been absorbing almost every component on a circuit board for decades, starting with transistors, resistors, and capacitors '€” then progressing to gates, ALUs...
May 24, 2018
Amazon has apparently had an Echo hiccup of the sort that would give customers bad dreams. It sent a random conversation to a random contact. A couple had installed numerous Alexa-enabled devices in the home. At some point, they had a conversation '€“ as couples are wont to...