industry news
Subscribe Now

Researchers Develop Hardware Encryption For New Computer Memory Technology

Security concerns are one of the key obstacles to the adoption of new non-volatile main memory (NVMM) technology in next-generation computers, which would improve computer start times and boost memory capacity. But now researchers from North Carolina State University have developed new encryption hardware for use with NVMM to protect personal information and other data.

NVMM technologies, such as phase-change memory, hold great promise to replace conventional dynamic random access memory (DRAM) in the main memory of computers. NVMM would allow computers to start instantly, and can fit more memory into the same amount of space used by existing technologies. However, NVMM poses a security risk.

Conventional DRAM main memory does not store data once the computer is turned off. That means, for example, that it doesn’t store your credit card number and password after an online shopping spree. NVMM, on the other hand, retains all user data in main memory even years after the computer is turned off. This feature could give criminals access to your personal information or other data if your laptop or smart phone were stolen. And, because the data in the NVMM is stored in main memory, it cannot be encrypted using software. Software cannot manage main memory functions, because software itself operates in main memory.

NC State researchers have developed a solution using a hardware encryption system called i-NVMM.

“We could use hardware to encrypt everything,” explains Dr. Yan Solihin, associate professor of electrical and computer engineering at NC State and co-author of a paper describing i-NVMM, “but then the system would run very slowly – because it would constantly be encrypting and decrypting data.

“Instead, we developed an algorithm to detect data that is likely not needed by the processor. This allows us to keep 78 percent of main memory encrypted during typical operation, and only slows the system’s performance by 3.7 percent.”

The i-NVMM tool has two additional benefits as well. First, its algorithm also detects idleness. That means any data not currently in use – such as your credit card number – is automatically encrypted. This makes i-NVMM even more secure than DRAM. Second, while 78 percent of the main memory is encrypted when the computer is in use, the remaining 22 percent is encrypted when the computer is powered down.

“Basically, unless someone accesses your computer while you’re using it, all of your data is protected,” Solihin says.

i-NVMM relies on a self-contained encryption engine that is incorporated into a computer’s memory module – and does not require changes to the computer’s processors. That means it can be used with different processors and different systems.

“We’re now seeking industry partners who are interested in this technology,” Solihin says.

The paper, “i-NVMM: A Secure Non-Volatile Main Memory System with Incremental Encryption,” will be presented June 6 at the International Symposium on Computer Architecture (ISCA) in San Jose, Calif. The paper was co-authored by Dr. Siddhartha Chhabra, a former Ph.D. student at NC State. The research was supported, in part, by the National Science Foundation.

NC State’s Department of Electrical and Computer Engineering is part of the university’s College of Engineering.

Leave a Reply

featured blogs
Apr 25, 2024
Cadence's seven -year partnership with'¯ Team4Tech '¯has given our employees unique opportunities to harness the power of technology and engage in a three -month philanthropic project to improve the livelihood of communities in need. In Fall 2023, this partnership allowed C...
Apr 24, 2024
Learn about maskless electron beam lithography and see how Multibeam's industry-first e-beam semiconductor lithography system leverages Synopsys software.The post Synopsys and Multibeam Accelerate Innovation with First Production-Ready E-Beam Lithography System appeared fir...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

SLM Silicon.da Introduction
Sponsored by Synopsys
In this episode of Chalk Talk, Amelia Dalton and Guy Cortez from Synopsys investigate how Synopsys’ Silicon.da platform can increase engineering productivity and silicon efficiency while providing the tool scalability needed for today’s semiconductor designs. They also walk through the steps involved in a SLM workflow and examine how this open and extensible platform can help you avoid pitfalls in each step of your next IC design.
Dec 6, 2023
18,651 views