editor's blog
Subscribe Now

Single-Radio Zigbee and Thread

Earlier this year we saw that Zigbee and Thread were collaborating to implement Zigbee profiles or “clusters,” which normally appear at the top of a Zigbee stack, over the Thread stack as well.

Strategically, this allows top-level Zigbee to handle IP-based data, since Thread includes 6LoWPAN, an IPv6 adaptation for running over 802.15.4, the radio protocol used by Zigbee. Much of the world operates with IP on layer 3; this allows Zigbee infrastructure to participate.

That’s at the top of the stack. Meanwhile, at the bottom, Greenpeak recently announced a single-radio implementation of Zigbee and Thread in their GP712. It can handle both flows with a single radio – or, alternatively, it can serve as a single-stack chip, usable for either stack with a single stocking unit. It needs a thin layer to mux/demux the traffic into the appropriate stack once it leaves the radio.

This got me thinking about how these two reconvergent stacks might play together in different devices. This is based on realizing that an Internet of Things (IoT) edge node is likely to implement only one of the two protocols. So a mixed device isn’t likely to serve there (except as a single-SKU chip that goes either way).

Greenpeak says they’re targeting infrastructure nodes – hubs, gateways, set-top boxes and the like – and those devices are indeed likely to be managing multiple traffic streams across multiple platforms. On the other hand, it’s unlikely that they’ll be working at the application layer (except perhaps for deep packet inspection).

It may be a failure of imagination on my part, but the only node I can picture that might realistically process multiple protocols and implement the application layer would be a server. I’d include a phone as a possible server, although phones typically don’t do 802.15.4.

The following figures illustrate the different configurations that I’ve derived from this mental wandering. Presumably, the GP712 could serve in any of them with appropriate configuration.

Greenpeak_Zigbee-Thread.png 

You can read more about Greenpeak’s new device in their announcement.

Leave a Reply

featured blogs
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 23, 2024
We explore Aerospace and Government (A&G) chip design and explain how Silicon Lifecycle Management (SLM) ensures semiconductor reliability for A&G applications.The post SLM Solutions for Mission-Critical Aerospace and Government Chip Designs appeared first on Chip ...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

VITA RF Product Portfolio: Enabling An OpenVPX World
Sponsored by Mouser Electronics and Amphenol
Interoperability is a very valuable aspect of military and aerospace electronic designs and is a cornerstone to VITA, OpenVPX and SOSA. In this episode of Chalk Talk, Amelia Dalton and Eddie Alexander from Amphenol SV explore Amphenol SV’s portfolio of VITA RF solutions. They also examine the role that SOSA plays in the development of military and aerospace systems and how you can utilize Amphenol SV’s VITA RF solutions in your next design.
Oct 25, 2023
23,864 views