editor's blog
Subscribe Now

Separating You from Your Phone

In high-school physics class, we did an experiment. It’s so crude by today’s standards, that I feel like something of a fossil as I recall it, but here goes. We had a ticker-tape kind of thing that would make a mark on a paper tape as you pulled the tape through. It marked at a constant frequency, so if you pulled the tape faster, the dots were farther apart. So dot spacing became a measure of speed.

The experiment consisted of two parts. In the first, we held the tape and walked a distance, swinging our arms like normal. In the second, we walked the same distance at the same speed, but holding our arms still.

In the first case, the dots tell a tale of acceleration and deceleration, repeated over and over as our arms moved forward and then backward. The second case showed no such variation; speed was consistent. But the trick was, if you averaged the speeds on the first one, you ended up with the exact same speed as the second one*. Which is obvious with just a little thought: it’s the speed we were actually walking.

This was an early case of, well, not sensor fusion, but, how about if we call it “implied signal extraction.” In this case, there was only one sensor (the tape), which is why there’s no fusion. But in modern times, such extraction might involve fusion.

Here’s the deal: the tape was directly measuring the speed of our hands, when what we were really interested in was the speed of our moving bodies. By averaging the hand movements, we were able to extract the implied body movement signal out of a raw hand movement signal that contained lots of potentially misleading artifacts.

This is happening in spades today in the navigation/orientation business. This will be obvious to the folks that have been trying to manage the problem for a while, but the rest of us may not realize how tough this is. We expect that, with our phones, we now have a way to navigate simply because our phone goes with us.

But put your phone in your hand. Now extend your arm forward: according to the phone, you just moved forward a foot or so. But you didn’t: your arm moved your phone forward; you didn’t go anywhere. Now put your phone in your back pocket, display to the outside. According to your phone, you just turned around. But you didn’t: you turned your phone around as you put it in your pocket. (Heck, the phone might even think you’re standing on your head if you put it in your pocket upside down.)

This drives at the art of orientation-to-trajectory management, a topic I discussed with Movea’s Tim Kelliher at Sensors Expo, and something Movea is working on. Unlike my high school scenario, where, if done right, we’re essentially averaging out a well-controlled sinusoidal movement, our phones go all over the place while we stand in one place. We pick it up, turn it around to orient it properly, switch hands, drop it, put it into one pocket or another, wave it randomly when we try to swat away that bee with our phone-holding hand.

Oh, and we can also do all of this while walking. Or running. Or dancing. Or running in random directions while we try to escape that bee, hands still aflail.

When you think about it, it’s got to be really hard to evaluate all of the sensor inputs on the phone and extract from that a signal that describes how the phone holder is moving. The more I think about it, the more I feel like I would have no idea how to start. Presumably some heuristics would be involved, but even then, it’s not obvious.

For instance, if the proximity sensor is firing, then you might assume that you’re probably on a call, and so conclude that the phone is stationary with respect to the body, up by your ear. That might be right 90% of the time, but then some goofball will, just for sh…ucks and grins, move the phone sultrily up and down along his or her body, keeping it close. The “on a call” heuristic would then decide that we’re walking up and down hills.

So when solutions to this problem are finally announced, I can imagine the aforementioned goofball types to try all kinds of things to see if they can fool the system. Typical silliness, but it also provides clues about how the algorithm works.

For the rest of us, well, let’s not take it for granted. This is a hard problem, and any effective solution will have been hard won.

 

*It actually didn’t work for me; my teacher declared, in frustration, that I needed to learn to walk a consistent speed. Not sure if I’ve mastered that yet; it’s not high on my bucket list…

Leave a Reply

featured blogs
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 23, 2024
We explore Aerospace and Government (A&G) chip design and explain how Silicon Lifecycle Management (SLM) ensures semiconductor reliability for A&G applications.The post SLM Solutions for Mission-Critical Aerospace and Government Chip Designs appeared first on Chip ...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Introducing QSPICE™ Analog & Mixed-Signal Simulator
Sponsored by Mouser Electronics and Qorvo
In this episode of Chalk Talk, Amelia Dalton and Mike Engelhardt from Qorvo investigate the benefits of QSPICE™ - Qorvo’s Analog & Mixed-Signal Simulator. They also explore how you can get started using this simulator, the supporting assets available for QSPICE, and why this free analog and mixed-signal simulator is a transformational tool for power designers.
Mar 5, 2024
5,610 views