First 1000Base-T1 compliance test solution in the R&S RTO oscilloscope supports automotive industry

Automotive Ethernet has established itself as a standard communications structure. All major manufacturers now depend on this cost-efficient solution for fast data transmission in motor vehicles. With the new IEEE 1000Base-T1 standard, the success story continues. Rohde & Schwarz is the first T&M equipment manufacturer to offer a compliance test solution for 1000Base-T1.

Munich, March 15, 2017 — Rohde & Schwarz introduces the R&S RTO-K87 option, the first compliance test software on the market for automated testing of IEEE 1000Base-T1 interfaces. Fast data transmission within automotive Ethernet networks is critical for driver assistance systems as well as for autonomous driving applications. Rohde & Schwarz has been an active participant in IEEE and OPEN Alliance, using its expertise to help drive the development of a reliable test solution.

On the R&S RTO digital oscilloscope, users can now perform the tests defined in the standard and assess the reliability of data communications over 1000Base-T1 interfaces. When used in combination with the optional R&S RTO-B6 integrated arbitrary waveform generator, the R&S RTO2000 can independently generate the required 125 MHz interfering signal – no additional instruments are required.

The R&S RTO-K87 compliance test software includes pictorial instructions that guide users through the measurements step by step. The oscilloscope is automatically configured and the results are documented in a straightforward test report. The software additionally supports the standard’s return loss and mode conversion measurements, which are performed on a Rohde & Schwarz network analyzer.

The Rohde & Schwarz compliance tests for 1000Base-T1 and 100Base-T1/BroadR-Reach as well as the trigger and decoding options for LIN, CAN, CAN-FD, FlexRay and CXPI provide the automotive industry with a comprehensive, yet compact test solution for ECU development.

The R&S RTO-K87 compliance test software option for 1000Base-T1 is now available from Rohde & Schwarz. For more Information visit www.rohde-schwarz.com/ad/press/rto2000.

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured chalk talk

High Voltage Stackable Dual Phase Constant On Time Controllers - Microchip and Mouser

Sponsored by Mouser Electronics and Microchip

In this episode of Chalk Talk, Chris Romano from Microchip and Amelia Dalton discuss the what, where, and how of Microchip’s high voltage stackable dual phase constant on time controllers. They investigate the stacking capabilities of the MIC2132 controller, how these controllers compare with other solutions on the market, and how you can take advantage of these solutions in your next design.

Click here for more information about Microchip Technology MIC2132 Dual Phase Synchronous Buck Controllers

May 22, 2023

37,913 views

First 1000Base-T1 compliance test solution in the R&S RTO oscilloscope supports automotive industry

Related