industry news
Subscribe Now

New EEMBC Benchmark Targets Internet of Things Security Functions

EL DORADO HILLS, CA–(Marketwired – Nov 29, 2016) – EEMBC®, the Embedded Microprocessor Benchmark Consortium setting the industry standard for valuable application-specific benchmarks, today announced its efforts on a benchmark to ensure optimum efficiency of security implementations in Internet of Things (IoT) devices. This new benchmark, currently in development within EEMBC’s IoT Security working group, aims to provide an industry-created and standardized tool for application developers to quickly, accurately, and equitably compare the performance and energy efficiency of security solutions targeted at IoT end-point applications — those “Things.”

“The market for IoT security products is currently small but is growing rapidly as both consumers and businesses use connected devices in ever greater numbers and realize their vulnerabilities,” said Ruggero Contu, research director at Gartner. “Gartner forecasts that 6.4 billion connected things will be in use worldwide in 2016, up 30 percent from 2015, and will reach 11.4 billion by 2018. However, considerable variation exists among different industry sectors as a result of different levels of prioritization and security awareness.”

“Security is a priority of application developers, though they are typically concerned that implementing security functions within their IoT devices will hurt performance and lower battery life,” said EEMBC president, Markus Levy. “Therefore, a critical goal of our new benchmark will be to quantify the latency and energy impact of implementing security to allow developers to select the optimal combination of microcontroller, hardware, and/or software security products for their application.”

The EEMBC IoT Security benchmark will be rolled out in phases. The first phase, planned for beta release in Q1 2017, will contain tests to evaluate a variety of standalone security functions such as SHA256, AES, and ECC. The benchmark will enable EEMBC members to implement these algorithms on their microcontrollers using software libraries or hardware accelerators, whichever yields the best-in-class balance of performance, energy, and cost.

The EEMBC IoT Security working group is co-chaired by Mike Borza (Member of Technical Staff, Security IP, Synopsys) and Ruud Derwig (Member of Technical Staff, Processor Solutions, Synopsys). Borza says, “In subsequent phases of the IoT Security benchmark, the working group plans to combine the standalone functions into specific IoT profiles that will allow users to better see, control, and optimize the impact of security at the system level.” The group’s modular approach also makes it easier for users to take advantage of optimized security implementations, such as cryptographic processors or modules.”

The EEMBC IoT Security benchmark will complement the EEMBC Connect benchmark, also in development. Connect is being built to reliably determine the combined energy consumption of a system, taking into consideration the real-world effects of sensor inputs and communication (e.g. Bluetooth®, Wi-Fi®). Current active working group members include Analog Devices, ARM, C-Sky Microsystems, Flex, Intel, Microchip, Nordic Semiconductor, NXP, Redpine Signals, Renesas, Silicon Labs, STMicroelectronics, Synopsys, and Texas Instruments. Contact EEMBC directly for more information; www.eembc.org.

EEMBC encourages vendors and manufacturers to join the consortium’s working groups to contribute their expertise and needs to the definition and development of its next-generation benchmark suites. For more information: http://www.eembc.org/iot-secure/about.php. To join EEMBC, contact Markus Levy.

About EEMBC

EEMBC was formed in 1997 to develop performance benchmarks for the hardware and software used in embedded systems. EEMBC benchmarks help predict the performance and energy consumption of embedded processors and systems in a range of applications (e.g. autonomous driving, mobile imaging, Internet of Things, scale-out servers, and mobile devices) and disciplines (processor core functionality, floating-point, multicore, and energy consumption).

EEMBC members include Ambiq Micro, AMD, Analog Devices, Andes Technology, ARM, C-Sky Microsystems, Cavium, Codeplay Software, Cypress Semiconductor, Dell, Flextronics, Green Hills Software, Huawei Technologies, IAR Systems, Imagination Technologies-MIPS, Intel, Marvell Semiconductor, Microchip Technology, Nokia, Nordic Semiconductor, NVIDIA, NXP Semiconductors, Realtek Semiconductor, Redpine Signals, Renesas Electronics, Samsung Electronics, Silicon Labs, Somnium Technologies, Sony Interactive Entertainment, STMicroelectronics, Synopsys, Texas Instruments, and Wind River Systems.

EEMBC is a registered trademark of the Embedded Microprocessor Benchmark Consortium.

Leave a Reply

featured blogs
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 23, 2024
We explore Aerospace and Government (A&G) chip design and explain how Silicon Lifecycle Management (SLM) ensures semiconductor reliability for A&G applications.The post SLM Solutions for Mission-Critical Aerospace and Government Chip Designs appeared first on Chip ...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Portable Medical Devices and Connected Health
Decentralized healthcare is moving from hospitals and doctors’ offices to the patients’ home and office and in the form of personal, wearable, and connected devices. In this episode of Chalk Talk, Amelia Dalton and Roger Bohannan from Littelfuse examine the components, functions and standards for a variety of portable connected medical devices. They investigate how Littelfuse can help you navigate the development of your next portable connected medical design.
Jun 26, 2023
34,170 views