industry news
Subscribe Now

RFEL to announce TRAILBLAZER: an off-the-shelf driver vision aid for military vehicles at DVD 2016

Newport, Isle of Wight, UK – 22 August 2016 – RFEL will be announcing a new, HD-SDI and Generic Vehicle Architecture (GVA) compliant military driver vision aid at DVD 2016: Zone C3 Stand 515.  http://www.theevent.co.uk/Visitor/Where-and-When

TRAILBLAZER™ improves driver and crew effectiveness by extending the field of view beyond the normal spectrum, even in adverse weather and low-light conditions. It offers a new, best-in-class driver camera sub-system for military vehicle system integrators tasked with delivering to the most demanding specifications within tight timescales and budgets. 

Navigating an unfamiliar terrain safely, in a degraded visual environment, is a common challenge in the modern battlefield.  When the field of view is limited and threats are unknown, total command of the road ahead and complete situational awareness are essential for success.  Where primary vision is restricted, such as in armoured vehicles operating with hatches down, TRAILBLAZER’s dual-channel daylight and infrared video sensors, along with RFEL’s sophisticated image processing technology, can give the driver, crew and commander views from ahead and behind, in all weathers, day or night.

With front and rear camera units as part of the system, this high performance driver aid uses a high definition sensor and optical package to deliver multiple fields of view from within the total field of regard around the fore and aft install locations. The inclusion of a high quality, long-wave infrared camera channel extends this capability across the thermal scene. A powerful on-board processing package, including RFEL’s Digital Video Fusion algorithm, means that TRAILBLAZER delivers reliable and continuous manoeuvre capability. This includes good threat and obstacle detection, downwards, nearby and far away, and a comfortable view of the route, intuitively tuned to the human operator’s needs

Offering multiple, independent channel outputs on the network interface, TRAILBLAZER can provide video to more than one user on the platform. Each user can command views from front and rear, including wide-angle situational awareness views in addition to driving views and, by exploiting the underlying higher resolution of the raw sensor, a high quality digital zoom capability. This can aid the driver in terrain negotiation and obstacle avoidance, route selection and improve manoeuvrability, whilst other crewmembers can assist with surveillance tasks in parallel to ensure safe and effective operation. This array of data streams need not swamp the platform’s available bandwidth either: output channels can be capped, fixed or shared over the available bandwidth, leaving the integrator fully in control of operating margins and reliability.

Integration of TRAILBLAZER is made as flexible as possible. The product has two complementary interfaces. The first is a native digital video HD-SDI output, requiring only simple coaxial cabling and a point-to-point installation to create a closed circuit driving aid, including connectivity to the rear view unit. The second is a GVA compliant DEF STAN 00-082 VIVOE (Vetronics Infrastructure for Video Over Ethernet) streaming interface, designed specifically to support the new breed of networked video vehicle electronics (Vetronics) architectures, such as the UK’s GVA. With their own respective control interfaces, these options can be used separately, or simultaneously, without impact on their individual performance. For instance: as a closed-circuit driver aid with a network output to provide situational awareness to other crew members, or within a purely GVA networked installation that features HD-SDI interfaced legacy displays. Purely GVA fit-outs do not need to compromise on latency either, as the primary driving stream assures ultra-low-latency performance through its use of FPGA hardware powered Ethernet interfaces.

As world-leaders in efficient and real-time video processing, RFEL’s products benefit from in-house and award-winning expertise. TRAILBLAZER incorporates RFEL’s multi-resolution advanced Digital Video Fusion. This technique is superior to common blending, averaging and overlay approaches typically taken to make use of thermal scene data within an otherwise obscured daylight field of view. RFEL’s algorithm intelligently generates a composite output video stream on a pixel-by-pixel basis. This means no loss of higher resolution features from any one sensor; it means no reduction in colour content due to bland and uniform thermal regions; and it means a truly intuitive augmented view of the widest spectrum of scenery data. This is further enhanced by pre-processing techniques such as contrast enhancement and, optionally, high frequency Digital Stabilisation and/or customisable pseudo-colour highlighting.

Wayne Cranwell, RFEL’s Video Processing Business Development lead, concluded, “We believe TRAILBLAZER is going to be game-changing on technical merit alone, but also consider that RFEL’s position as a UK SME supplier offers compelling benefits in terms of cost and innovation. In any case, as a turn-key solution, it will bring this capability within the scope of a broad range of armoured and specialist military vehicles, in addition to emergency responder or industrial vehicles upgrades or new designs.”

RFEL will be exhibiting TRAILBLAZER with live technology demonstrations at the DVD2016 exhibition, Zone C3 stand 515, from 7th-8th September at Millbrook Proving Ground, Bedfordshire MK45 2JH, UK. 

Videos showing TRAILBLAZER in action are at:

https://www.youtube.com/watch?v=aI0k1njzsfo

https://www.youtube.com/watch?v=7FLtWM-oGVo

https://www.youtube.com/watch?v=IgncUOV75cs

RFEL (www.rfel.com)

RFEL is a UK-based technology company providing high specification signal, image and video processing solutions to government, defence, security and industrial customers. RFEL’s unique, easy-to-integrate products, and proven designs, developed for a technically demanding environment, give customers a route to reliable product development at low-risk with a short time to market, to meet tomorrow’s requirements today. RFEL operates with a total customer support philosophy.

Leave a Reply

featured blogs
Apr 24, 2024
Learn about maskless electron beam lithography and see how Multibeam's industry-first e-beam semiconductor lithography system leverages Synopsys software.The post Synopsys and Multibeam Accelerate Innovation with First Production-Ready E-Beam Lithography System appeared fir...
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

PIC32CX-BZ2 and WBZ451 Multi-Protocol Wireless MCU Family
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Shishir Malav from Microchip explore the benefits of the PIC32CX-BZ2 and WBZ45 Multi-protocol Wireless MCU Family and how it can make IoT design easier than ever before. They investigate the components included in this multi-protocol wireless MCU family, the details of the software architecture included in this solution, and how you can utilize these MCUs in your next design.
May 4, 2023
40,688 views