36V Ultralow Noise Precision Op Amp Features 30nVP-P 0.1Hz to 10Hz Noise

MILPITAS, CA – August 17, 2016 – Linear Technology introduces the LT6018, a precision op amp featuring 30nVP-P 0.1Hz to 10Hz noise and 50?V max input offset voltage. Designed especially for applications sensitive to low frequency noise, the LT6018 has a very low 1/f corner frequency of less than 1Hz. The low input offset voltage holds over temperature and input common mode range: TCVOS is 0.5?V/°C maximum and CMRR is 124dB minimum. Open loop gain is typically 142dB, enabling the device to achieve less than 1ppm nonlinearity.

The LT6018 has 15MHz gain-bandwidth product and employs slew enhancement circuitry to achieve up to 30V/µs slew rate. The part draws 7.2mA, which can be reduced during periods of non-use to 6.2?A using its shutdown pin.

The LT6018 is specified for operation from 8V to 33V supplies, for industrial (–40°C to 85°C) and extended (–40°C to 125°C) temperature ranges. It is available in SO-8E with exposed center pad for enhanced heat dissipation, and space-saving 4mm x 3mm DFN packages.

The LT6018 is priced starting at $3.25 each in 1,000 piece quantities. For more information, visitwww.linear.com/product/LT6018.

Summary of Features: LT6018

Ultralow Voltage Noise
- 30nVP-P Noise: 0.1Hz to 10Hz
- 1.2nV/?Hz Typical at 1kHz
Maximum Offset Voltage: 50?V
Maximum Offset Voltage Drift: 0.5?V/°C
CMRR: 124dB (Minimum)
AVOL: 132dB (Minimum)
Slew Rate: 30V/µs
Gain-Bandwidth Product: 15MHz
Wide Supply Range: 8V to 33V
Ultralow THD: –115dB at 1kHz
Unity Gain Stable
Low Power Shutdown: 6.2?A
SO-8E and 4mm × 3mm 12-Lead DFN Packages
4.5kV HBM and 2kV CDM Tolerant

Pricing shown is for budgetary use only and may differ due to local duties, taxes, fees and exchange rates.

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured chalk talk

Nexperia Energy Harvesting Solutions

Sponsored by Mouser Electronics and Nexperia

Energy harvesting is a great way to ensure a sustainable future of electronics by eliminating batteries and e-waste. In this episode of Chalk Talk, Amelia Dalton and Rodrigo Mesquita from Nexperia explore the process of designing in energy harvesting and why Nexperia’s inductor-less PMICs are an energy harvesting game changer for wearable technology, sensor-based applications, and more!

Click here for more information about Nexperia NEH2000BYJ Energy Harvesting PMIC

May 9, 2023

40,092 views

36V Ultralow Noise Precision Op Amp Features 30nVP-P 0.1Hz to 10Hz Noise

Related