- Exar’s first Universal PMIC with three integrated synchronous MOSFET power stages
- Board-space efficient solution supports broad range of FPGAs and SoC processors
- Configurable through I2C using PowerArchitectTM 4 design and configuration software
Fremont, CA – May 18, 2016 – Exar Corporation (NYSE: EXAR), a leading supplier of analog mixed-signal products serving the industrial, high-end consumer and infrastructure markets, today announced the introduction of the XR77103 https://www.exar.com/product/power-management/universal-pmics/universal-pmics/xr77103?utm_source=PR&utm_medium=media&utm_campaign=xr77103&utm_content=xr77103 Universal PMIC, Exar’s first Universal PMIC with three integrated synchronous MOSFET power stages. This integration results in an even smaller solution than was possible before, a tiny, 4mm x 4mm IC which delivers an easy-to-use power management solution for a broad range of FPGAs, SoCs, DSPs and video processors.
The XR77103 features an I2C interface allowing customers to control output voltage (from 0.8V to 6V), switching frequency (from 300kHz to 2.2MHz), power sequencing, and current limit. The XR77103 is supported by a new release of PowerArchitectTM 4 design and configuration software.
The XR77103 operates from a 4.5V to 14V input supply and all three outputs are designed for 2A load currents with peak currents up to 3A. Since the device employs a current mode control architecture, outputs can be easily paralleled to provide up to a total of 5A allowing the XR77103 to power a range of low power processors. A selectable Pulse Skipping Mode (PSM) results in improved efficiency at light loads, a key feature in meeting standby energy requirements or extending battery life.
As the device supports up to a 2.2MHz switching frequency and is packaged in a 4x4mm QFN, it requires fewer and smaller external components, saving engineers valuable board space in their next design. This family also includes two versions of the XR77103 which offer a fixed set of features for designers not requiring the I2C interface. The XR77103ELB-A0R5 and –A1R0 are fixed at switching frequencies of 500kHz and 1MHz, respectively. Both products feature a 0.8V, high accuracy reference (1%) and their output voltages are set by external resistors.
“The XR77103 Universal PMIC with integrated MOSFETs showcases Exar’s enhanced integration capability for monolithic power solutions,” said Tuomas Hollman, Exar’s vice president, power management products. “This extends our portfolio to cover systems that require multiple low current rails in a highly integrated solution, making the XR77103 an ideal fit for applications such as projectors, displays, industrial HVAC systems and home gateways.”
Availability
The XR77103ELB, XR77103ELB-A0R5 and XR77103ELB-A1R0 are available in RoHS compliant, green/halogen free, space-saving 4×4 QFN packages. Prices start at $1.95, $1.60 and $1.60, respectively, in quantities of 1,000. For more information, visit the Universal PMIC page. https://www.exar.com/products/power-management/universal-pmics/universal-pmics?utm_source=PR&utm_medium=media&utm_campaign=xr77103&utm_content=PMIC
?About Exar
Exar Corporation designs, develops and markets analog mixed-signal products for the industrial and embedded systems communications, high-end consumer and infrastructure markets. Exar’s broad product portfolio includes power management, signal conditioning, interface, display, data management and video processing solutions. Exar has locations worldwide providing real-time customer support. For more information, visit http://www.exar.com.
Exar, XR, the Exar logo are registered trademarks and PowerArchitect is a trademark of Exar Corp. All other trademarks are the property of their respective owners.
