industry news
Subscribe Now

IRT Nanoelec Project Integrates Laser Directly on Silicon with a Modulator

GRENOBLE, France – March 18, 2016 – IRT Nanoelec, an R&D consortium focused on information and communication technologies (ICT) using micro- and nanoelectronics, today announced the first co-integration of a III-V/silicon laser and silicon Mach Zehnder modulator demonstrating 25 Gbps transmission on a single channel. This transmission rate usually is achieved using an external source, over a 10 km single-mode fiber.

Current interconnect technologies, which use micro-optics integration to assemble a discrete laser and a silicon photonic circuit, will soon reach their limits and new, different solutions will have to be found to handle increasing traffic.

Integrating photonics capabilities on silicon chips is replacing currently established technologies, vastly increasing bandwidth, density and reliability, while dramatically reducing energy consumption. In the age of photonics-on-silicon, data transmission will be measured in terabits per second.

“Jointly obtained by STMicroelectronics and Leti in the frame of the IRT Nanoelec cooperation, these results, especially fabricating the laser directly on silicon, demonstrate IRT Nanoelec’s worldwide leadership in III/V-on-silicon integration to achieve high-data-rate fiber-optic modules,” said Stéphane Bernabé, project manager. “IRT Nanoelec and its partners on this project, Leti,STMicroelectronics, Samtec and Mentor Graphics, are paving the way to integrating this technology in next-generation transceivers for optical data links.”

To achieve these recent results, silicon photonics circuits integrating the modulator were processed first on a 200mm SOI wafer, although 300mm wafers also could be used in the near future. Then, a two-inch wafer of III-V material was directly bonded on the wafer. In the third step, the hybrid wafer was processed using conventional semiconductor and/or MEMS process steps to produce an integrated modulator-and-laser transmitter.

IRT Nanoelec launched its silicon photonics program in 2012, with core members Mentor Graphics, STMicroelectronics and CNRS. The program brings together, under one roof, the expertise and equipment needed to address the entire photonics-on-silicon value chain. 

Leti, which will attend the Optical Fiber Communication Conference in Anaheim, Calif., March 20-24, and have a booth at the Exhibition Hall (3759), is a major innovation player in III-V/silicon integration for high-data-rate fiber optics modules.

About IRT-Nanoelec Research Technological Institute (IRT)

Nanoelec Research Technological Institute (IRT), headed by CEA-Leti conducts research and development in the field of information and communication technologies (ICT) and, specifically, micro- and nanoelectronics. Based in Grenoble, France, IRT Nanoelec leverages the area’s proven innovation ecosystem to create the technologies that will power the nanoelectronics of tomorrow, drive new product development and inspire new applications – like the Internet of Things – for existing technologies. The R&D conducted at IRT Nanoelec provides early insight into how emerging technologies such as 3D integration and silicon photonics will affect integrated circuits. Visit www.irtnanoelec.fr  

Leave a Reply

featured blogs
Apr 23, 2024
The automotive industry's transformation from a primarily mechanical domain to a highly technological one is remarkable. Once considered mere vehicles, cars are now advanced computers on wheels, embodying the shift from roaring engines to the quiet hum of processors due ...
Apr 22, 2024
Learn what gate-all-around (GAA) transistors are, explore the switch from fin field-effect transistors (FinFETs), and see the impact on SoC design & EDA tools.The post What You Need to Know About Gate-All-Around Designs appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Achieving Reliable Wireless IoT
Wireless connectivity is one of the most important aspects of any IoT design. In this episode of Chalk Talk, Amelia Dalton and Brandon Oakes from CEL discuss the best practices for achieving reliable wireless connectivity for IoT. They examine the challenges of IoT wireless connectivity, the factors engineers should keep in mind when choosing a wireless solution, and how you can utilize CEL wireless connectivity technologies in your next design.
Nov 28, 2023
19,772 views