industry news
Subscribe Now

60V, 4A Synchronous Step-Down Regulator with Adjustable Rail-to-Rail Output & Wire Drop Compensation

MILPITAS, CA – January 18, 2016 – The LTC3649 is a high efficiency, 60V, 4A synchronous buck regulator that incorporates a constant frequency, current mode architecture and programmable output current and output voltage, which are set with a single external resistor. The LTC3649 operates from an input voltage range of 3.1V to 60V and provides an adjustable rail-to-rail output voltage range from 0V to 0.5V below VIN, while delivering up to 4A of continuous output current. Its wide input and output voltage range is ideal for a wide range of test, measurement and industrial applications. The LTC3649’s unique design includes an accurate internally generated 50µA current source on the ISET pin, enabling it to deliver outputs as low as 0V with the use of a single external programming resistor. Furthermore, the LTC3649 offers ±0.8% output voltage accuracy and programmable output current with ±4% accuracy without a sense resistor. Its switching frequency is user programmable from 300kHz to 3MHz, enabling the use of tiny, low cost capacitors and inductors. Combined with a 28-lead 4mm x 5mm QFN or thermally enhanced TSSOP package, the LTC3649 offers a very compact solution footprint.

The LTC3649 uses internal power switches with RDS(ON) of only 100mOhms and 50mOhms to deliver efficiencies as high as 95%. Burst Mode® operation offers high efficiency at light loads, requiring only 440µA of quiescent current. For noise sensitive applications, the LTC3649 can run in forced continuous mode, offering very low output ripple. Additional features include ±4% accurate output current monitoring, a power good voltage monitor, programmable wire drop compensation, external synchronization capability and thermal protection.

The LTC3649EUFD is available in a 4mm x 5mm QFN-28, the LTC3649EFE is offered in a 28-lead, thermally enhanced TSSOP package. Industrial grade versions, the LTC3649IUFD and LTC3649IFE, are guaranteed to operate over the -40°C to 125°C operating junction temperature range. Pricing starts at $5.65 each in 1,000-piece quantities. All versions are available from stock. For more information, visit www.linear.com/product/LTC3649.

Summary of Features: LTC3649 

  • Wide VIN Range: 3.1V to 60V
  • Wide VOUT Range: 0V to (VIN – 0.5V)
  • Single Resistor VOUT Programming
  • Integrated 110m? Top N-Channel/50m? Bottom N-Channel MOSFETs
  • 95% Efficiency with 12VIN and 5VOUT
  • Active IQ: 440µA, Shutdown IQ: 15µA
  • Accurate Current Monitoring (±4%) without Sense Resistor
  • Accurate Resistor Programmable Frequency (300kHz to 3MHz) with ±50% Frequency Sync Range
  • Accurate Programmable Output Current Limit
  • Input Voltage Regulation for MPPT Applications
  • ±0.8% Output Voltage Accuracy
  • Peak Current Mode Operation
  • Programmable Wire Drop Compensation
  • Burst Mode® Operation, Forced Continuous Mode
  • Internal Compensation & Programmable Soft-Start
  • Overtemperature Protection
  • Available in Thermally Enhanced 28-Lead 4mm x 5mm QFN & TSSOP Packages

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode and µModule are registered trademarks and Hot Swap is a trademark of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured chalk talk

Power Gridlock
The power grid is struggling to meet the growing demands of our electrifying world. In this episode of Chalk Talk, Amelia Dalton and Jake Michels from YAGEO Group discuss the challenges affecting our power grids today, the solutions to help solve these issues and why passive components will be the heroes of grid modernization.
Nov 28, 2023
19,454 views