industry news
Subscribe Now

Octal, Simultaneous Sampling ADC Achieves True 18-Bit Performance with Unprecedented Flexibility

MILPITAS, CA – June 9, 2015 – Linear Technology Corporation introduces the LTC2348-18, an 18-bit, 8-channel simultaneous sampling successive approximation register (SAR) ADC with industry-leading performance and flexibility. While converting eight channels at 200ksps per channel throughput, each SoftSpan input can be independently configured on a conversion-by-conversion basis to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals. The differential analog inputs operate over a wide 34V input common mode range, allowing the ADC to directly digitize a variety of signals to simplify the signal-chain design. The input signal flexibility, combined with unrivaled ±3LSB maximum INL, no missing codes at 18 bits, and 96.7dB SNR, makes the LTC2348-18 ideal for high performance industrial process control, test and measurement, power line monitoring, instrumentation and automatic test equipment applications.

The LTC2348-18 features a precision internal reference with 20ppm/°C maximum temperature coefficient and an integrated reference buffer capable of accurate one-shot measurements, providing space savings in densely packed circuit boards. Optionally, an external 5V reference can be used to expand the analog input range to ±12.5V. The device dissipates 140mW when converting eight channels simultaneously at 200ksps per channel, and features nap and power-down modes to reduce power dissipation at slower throughputs.

In addition to its unique analog characteristics, the LTC2348-18 offers unmatched digital flexibility, featuring pin-selectable SPI CMOS and LVDS serial interfaces. The wide digital output supply range allows the device to communicate with any CMOS logic between 1.8V and 5V. In CMOS mode, applications can employ between one and eight lanes of serial output data, enabling the user to optimize bus width and data throughput. LVDS mode offers low noise, high speed communications over greater distances using differential signaling. Together, these I/O interface options allow the LTC2348-18 to communicate equally well with legacy microcontrollers and modern FPGAs.

The LTC2348-18 is the first in a family of multichannel 18-/16-bit simultaneous sampling SAR ADCs. All specifications are guaranteed over the extended -40°C to 125°C temperature range. The LTC2348-18 is available now in a 48-lead, 7mm x 7mm LQFP package, priced starting at $23.35 each in 1,000-piece quantities. Samples and demo boards may be requested at www.linear.com/product/LTC2348-18, or by contacting your local Linear Technology sales office.

Summary of Features: LTC2348-18 

  • 200ksps per Channel Throughput
  • Eight Simultaneous Sampling Channels
  • ±3LSB INL Maximum
  • Guaranteed 18-Bit, No Missing Codes
  • Differential, Wide Common Mode Range Inputs
  • Per-Channel SoftSpan Input Ranges: ±10.24V, 0V to 10.24V, ±5.12V, 0V to 5.12V
  • 96.7dB Single-Conversion SNR (Typical)
  • Integrated Reference and Buffer (4.096V)
  • 2.5V to 5V External Reference Input Range
  • SPI CMOS (1.8V to 5V) and LVDS Serial I/O
  • 140mW Power Dissipation (Typical)
  • 48-Lead (7mm x 7mm) LQFP Package

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks and SoftSpan is a trademark of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Mar 29, 2024
By Mark Williams, Sr Software Engineering Group Director Translator: Masaru Yasukawa 差動アンプはã1つの入力信号ではなく2つの入力信号間の差にゲインをé...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Digi XBee 3 Global Cellular Solutions
Sponsored by Mouser Electronics and Digi
Adding cellular capabilities to your next design can be a complicated, time consuming process. In this episode of Chalk Talk, Amelia Dalton and Alec Jahnke from Digi chat about how Digi XBee Global Cellular Solutions can help you navigate the complexities of adding cellular connectivity to your next design. They investigate how the Digi XBee software can help you monitor and manage your connected devices and how the Digi Xbee 3 cellular ecosystem can help future proof your next design.
Nov 6, 2023
18,898 views