industry news
Subscribe Now

4GHz Amplifier Achieves <1pA Input Bias Current over -40°C to 85°C Temperature Range

MILPITAS, CA – May 13, 2015 – Linear Technology announces the LTC6268-10 single and dual LTC6269-10 4GHz FET-input op amps for high dynamic range and high speed transimpedance amplifier (TIA) applications. These new decompensated amplifiers extend the speed and dynamic range capabilities of this ultralow bias current op amp family for applications with a gain of 10 or higher. Input bias current is 0.9pA max over the -40°C to 85°C temperature range and just 4pA max over the entire -40°C to 125°C temperature range. Wideband voltage and current noise is 4nV/?Hz and 7fA/?Hz, respectively. With 0.45pF input capacitance and 1000V/µs slew rate, the LTC6268-10 and LTC6269-10 are well suited for photodiode and photomultiplier (PMT) circuits, high impedance sensor applications and for driving analog-to-digital converters (ADCs).

The LTC6268-10 data sheet features circuit and layout techniques to maximize TIA performance, with example circuits ranging from 20k? transimpedance gain at 210MHz bandwidth, to 402k? transimpedance gain at 34MHz bandwidth. The LTC6268-10 is available in a 6-lead SOT-23 package, as well as an 8-lead SOIC with guard pins to protect against board leakage currents. The LTC6269-10 is available in an MSOP-8 with exposed pad and in 3mm x 3mm DFN-10 packages. The LTC6268-10 and LTC6269-10 are fully specified over the industrial -40°C to 85°C and -40°C to 125°C temperature ranges. Prices start at $2.90 each for the LTC6268-10 and $4.90 each for the LTC6269-10 each in 1000-piece quantities. For more information, visit www.linear.com/product/LTC6268-10 andwww.linear.com/product/LTC6269-10.

Summary of Features: LTC6268-10 & 
LTC6269-10 

  • Gain Bandwidth Product: 4GHz
  • Low Input Bias Current
    • ±3fA Typ Room Temperature
    • 4pA Max at 125°C
  • Current Noise (100kHz): 
    7fA/?Hz
  • Voltage Noise (1MHz): 4.0nV/?Hz
  • Extremely Low CIN 0.45pF
  • Rail-to-Rail Output
  • AV ?10
  • Slew Rate: + 1500V/µs, -1000V/µs
  • Supply Range: 3.1V to 5.25V
  • Quiescent Current: 16.5mA
  • Operating Temp Range:
    -40°C to 125°C
  • Single in 8-Lead SO-8 & 6-LeadTSOT-23 Packages
  • Dual in 8-Lead MS8 3mm x 3mm &
    10-Lead DFN-10 Packages

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Advancements in Motor Efficiency Enables More Sustainable Manufacturing
Climate change is encouraging the acceleration of sustainable and renewable manufacturing processes and practices and one way we can encourage sustainability in manufacturing is with the use of variable speed drive motor control. In this episode of Chalk Talk, Amelia Dalton chats with Maurizio Gavardoni and Naveen Dhull from Analog Devices about the wide ranging benefits of variable speed motors, the role that current feedback plays in variable speed motor control, and how precision measurement solutions for current feedback can lead to higher motor efficiency, energy saving and enhanced sustainability.
Oct 19, 2023
23,563 views