industry news
Subscribe Now

Audi Selects Microchip’s MOST150 Technology for New Audi TT Virtual Cockpit System

CHANDLER, Ariz., April 20, 2015 [NASDAQ: MCHP] — Microchip Technology Inc., a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, today announced that AUDI AG is networking the Audi virtual cockpit system in its new TT Models using MOST® technology. Specifically, it is deploying Microchip’s OS81118 MOST150 Intelligent Network Interface Controller (INIC), which provides 150 Mbps performance, supports all MOST network data types, and includes a High Speed USB 2.0 interface (PHY/HSIC) to seamlessly connect with the virtual cockpit’s System-on-Chip processor.

To date, more than 150 million MOST devices have been installed in over 180 car models since 2001. AUDI AG and a host of other automakers have consistently chosen this technology for their infotainment networks because it provides high-bandwidth transport and audio streaming, software downloads, Ethernet Packet/Internet Protocol (IP), Synchronous, Isochronous and Control data with zero processor overhead, and proven electromagnetic-compatibility (EMC) behavior. This EMC performance is particularly good when combined with the optical physical layer that is utilized in the new Audi TT models. The MOST150 standard offers dedicated data channels with dedicated, application-specific hardware interfaces to simplify communication system designs and significantly reduce MCU software overhead. MOST technology also provides ultra-fast startup for immediate access to the vehicle’s multimedia systems.

The MOST Cooperation standards enable automotive OEMs and their Tier 1 suppliers with a proven and well-supported methodology for defining and implementing their infotainment systems, including a standard physical layer and a robust method for system management and control with superior reliability and Quality of Service (QoS). Using MOST technology also results in reduced weight for easier compliance with environmental regulations.

“We are excited that Audi once again adopted MOST technology in its new TT car models,” said Dan Termer, vice president of Microchip’s Automotive Information Systems Division. “We are also grateful for Audi’s contribution to the development of our OS81118 INIC, which is a great example of the many successful cooperative efforts between Audi and Microchip.”

To learn more about Microchip’s MOST technology products, visit: http://www.microchip.com/MOST-042015a.

Follow Microchip

About Microchip Technology

Microchip Technology Inc. (NASDAQ:  MCHP) is a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality. For more information, visit the Microchip website at http://www.microchip.com/Homepage-042015a.

Leave a Reply

featured blogs
Apr 23, 2024
The automotive industry's transformation from a primarily mechanical domain to a highly technological one is remarkable. Once considered mere vehicles, cars are now advanced computers on wheels, embodying the shift from roaring engines to the quiet hum of processors due ...
Apr 22, 2024
Learn what gate-all-around (GAA) transistors are, explore the switch from fin field-effect transistors (FinFETs), and see the impact on SoC design & EDA tools.The post What You Need to Know About Gate-All-Around Designs appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Achieving Reliable Wireless IoT
Wireless connectivity is one of the most important aspects of any IoT design. In this episode of Chalk Talk, Amelia Dalton and Brandon Oakes from CEL discuss the best practices for achieving reliable wireless connectivity for IoT. They examine the challenges of IoT wireless connectivity, the factors engineers should keep in mind when choosing a wireless solution, and how you can utilize CEL wireless connectivity technologies in your next design.
Nov 28, 2023
19,772 views