industry news
Subscribe Now

92mW Direct Conversion I/Q Modulator Has Better than 50dB Sideband & Carrier Suppression

MILPITAS, CA – August 11, 2014 – A new low power I/Q modulator from Linear Technology enables battery-powered transmitters operating in the 30MHz to 1.3GHz frequency bands, breaking new ground in power consumption, sideband suppression, carrier leakage and dynamic range performance.

The LTC5599 modulator, powered from a single 2.7V to 3.6V supply, draws only 28mA current, less than 60% that of alternative solutions-with no performance sacrifice. The LTC5599 delivers outstanding native -52.6dBc sideband suppression and -51.5dBm carrier leakage without calibration. With on-chip calibration resources, performance can be further improved to -60dBc and -65dBm, respectively. Moreover the device output achieves an excellent noise floor of -156dBm/Hz with an OIP3 of 20.8dBm, delivering superior transmitter performance.

The LTC5599 combines low power consumption and robust performance to suit a wide range of demanding battery-powered radios and wireless communications applications that are exposed to strong radio interference. These include wireless professional microphones, frequency hopping narrowband and broadband portable field radios, public safety radios, train communications, as well as broadband VHF/UHF white space modems, software-defined radios, portable RF test equipment, picocell base stations, low-power microwave backhaul, small wireless repeaters and satellite modems.

The device’s gain can be set via the on-chip serial port. A coarse gain control provides 1dB/step, along with adjustable fine gain control of 0.1dB. Total gain ranges from -19dB to 0dB. Varying the modulator gain enables device supply current from 8mA to 35mA, allowing the device to be set to lower power consumption with slightly reduced gain and performance, as needed for specific applications. Once set, the gain can be automatically temperature compensated by activating the on-chip temperature correction feature.

The LTC5599 supports narrowband and wideband radio applications. Its I and Q inputs are each capable of -1dB modulation bandwidth of up to 37MHz, supporting a total of 74MHz RF bandwidth at 900MHz frequency.

The LTC5599 is available in a 4mm x 4mm QFN package, providing a compact footprint. The product is specified for case operating temperature from -40°C to 105°C, supporting reliable operation in extended temperature environments. The device can be conveniently shut down with an enable control pin. When disabled, the device conserves power by drawing a typical of 0.7µA standby current. The LTC5599, priced starting at $4.45 each in 1,000-pieces quantities, is available immediately in production quantities. For more information, visitwww.linear.com/product/LTC5599.

Summary of Features: LTC5599

  • Operating Frequency: 
    30MHz to 1.3GHz
  • Power Consumption:
    3.3V / 28mA
  • Sideband Suppression:
    -52.6dBc at 500MHz
  • Carrier Leakage:
    -51.5dBm at 500MHz
  • Output IP3: +20.8dBm
  • Output IP2: +63.6dBm
  • Output Noise Floor:
    -156dBc/Hz at POUT = 3dBm
  • SPI Serial Bus Control:
    • Adjustable Gain:
      -19dB to 0dB in 1dB Steps
    • Gain Changes Affect Supply Current from 8mA to 35mA
    • I/Q Gain/Phase Adjust:
      Up to -60dBc Sideband Suppression
    • I/Q Offset Adjust:
      Up to -65dBm Carrier Leakage

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products.

For more information, visit www.linear.com. , LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 17, 2024
The semiconductor industry thrives on innovation, and at the heart of this progress lies Electronic Design Automation (EDA). EDA tools allow engineers to design and evaluate chips, before manufacturing, a data-intensive process. It would not be wrong to say that data is the l...
Apr 16, 2024
Learn what IR Drop is, explore the chip design tools and techniques involved in power network analysis, and see how it accelerates the IC design flow.The post Leveraging Early Power Network Analysis to Accelerate Chip Design appeared first on Chip Design....
Mar 30, 2024
Join me on a brief stream-of-consciousness tour to see what it's like to live inside (what I laughingly call) my mind...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

GaN FETs: D-Mode Vs E-mode
Sponsored by Mouser Electronics and Nexperia
The use of gallium nitride can offer higher power efficiency, increased power density and can reduce the overall size and weight of many industrial, automotive, and data center applications. In this episode of Chalk Talk, Amelia Dalton and Giuliano Cassataro from Nexperia investigate the benefits of Gan FETs, the difference between D-Mode and E-mode GaN FET technology and how you can utilize GaN FETs in your next design.
Mar 25, 2024
3,442 views