industry news
Subscribe Now

400mA Synchronous Buck Battery Charger Features 40V Operation to Accommodate a Variety of Input Source

MILPITAS, CA – August 7, 2014 – Linear Technology Corporation introduces the LTC4121, a constant-current/constant-voltage 400mA charger for Lithium-Ion, LiFePO4 and lead-acid batteries. The LTC4121’s high efficiency, synchronous step-down topology accepts a wide 4.4V to 40V input. A programmable 3.5V to 18V battery charge voltage range with tight ±1% accuracy makes the LTC4121 suitable for a variety of battery chemistries. The fixed output float voltage version, LTC4121-4.2, is suitable for 1S lithium-ion battery packs. A synchronous architecture enables charging efficiency up to 94% as well as low dropout start-up and operation. Typical applications include handheld instruments, solar-powered devices, as well as industrial and military sensors and devices.

To accommodate high impedance input sources such as solar panels, the LTC4121 can regulate its input voltage to a programmable percentage of the input open circuit voltage. If the input voltage falls below the user-defined percentage of the open circuit voltage, charge current will be automatically reduced. This maximum power point tracking (MPPT) technique enables maximum power operation with a variety of high impedance input sources, even in non-ideal operating environments.

The LTC4121 features programmable charge current from 50mA to 400mA and low voltage battery preconditioning. A recharge function starts a new charging cycle if the battery voltage drops 2.2% below the programmed charge voltage. Safety features include a two-hour termination timer as well as NTC temperature qualified charging. Two open-drain outputs provide charge and fault status information.

The LTC4121 is housed in a low profile (0.75mm) 16-pin 3mm x 3mm QFN package with exposed pad for excellent thermal performance. The device is guaranteed for operation from -40°C to 125°C in both E and I grades. 1,000-piece pricing starts at $2.60 each for the E grade. For more information, visit www.linear.com/product/LTC4121.

Summary of Features: LTC4121

  • Wide Input Voltage Range: 4.4V to 40V
  • Adjustable Battery Charge Voltage: 3.5V to 18V
  • Temperature Compensated Input Voltage Regulation for Maximum Power Point Tracking (MPPT)
  • Fixed 4.2V Charge Voltage Option: LTC4121-4.2
  • High Efficiency: Up to 94%
  • 50mA to 400mA Programmable Charge Current
  • ±1% Feedback Voltage Accuracy
  • Programmable ±5% Accurate Charge Current
  • Thermally Enhanced, Low Profile (0.75mm) 16-Lead 3mm x 3mm QFN Package

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 23, 2024
Do you think you are spending too much time fine-tuning your SKILL code? As a SKILL coder, you must be aware that producing bug-free and efficient code requires a lot of effort and analysis. But don't worry, there's good news! The Cadence Virtuoso Studio platform ha...
Apr 23, 2024
We explore Aerospace and Government (A&G) chip design and explain how Silicon Lifecycle Management (SLM) ensures semiconductor reliability for A&G applications.The post SLM Solutions for Mission-Critical Aerospace and Government Chip Designs appeared first on Chip ...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

OPTIGA™ TPM SLB 9672 and SLB 9673 RPI Evaluation Boards
Sponsored by Mouser Electronics and Infineon
Security is a critical design concern for most electronic designs today, but finding the right security solution for your next design can be a complicated and time-consuming process. In this episode of Chalk Talk, Amelia Dalton and Andreas Fuchs from Infineon investigate how Infineon’s OPTIGA trusted platform module can not only help solve your security design concerns but also speed up your design process as well.
Jun 26, 2023
34,360 views