industry news
Subscribe Now

Precision Op Amps Operate on 140V Supply

MILPITAS, CA – August 4, 2014 – Linear Technology announces the LTC6091 and LTC6090-5, additions to the LTC6090 family of precision operational amplifiers which operate on a supply voltage up to 140V (±70V). The dual LTC6091 features separate output disable pins, making it useful in high voltage multiplexed applications. The decompensated single LTC6090-5 amplifier offers higher speed and is stable at a gain of 5 or above.

The LTC6090, LTC6090-5, and LTC6091 combine wide supply range, high precision, and low noise. Input offset voltage is 1.25mV max over temperature, and low frequency (1/f) noise is 3.5µVP-P from 0.1Hz to 10Hz. The CMOS input structure keeps the input bias current to 50pA maximum at 85°C, making the LTC6090 family suitable for sensor circuits and other applications requiring high input impedance.

The decompensated LTC6090-5 offers 24MHz gain-bandwidth product and 37V/µs slew rate, compared with 12MHz and 21V/µs for the gain-of-1 stable LTC6090 and LTC6091.

Supply current is 3.9mA per amplifier max. Output short-circuit current is typically ±90mA. A thermal flag pin (TFLAG) signals when the device junction temperature exceeds 145°C. This pin can be connected to the Output Disable pin for active thermal management.

The LTC6090 and LTC6090-1 are available in 8-pin SOIC and 16-pin TSSOP packages. The LTC6091 is offered in a 16-pin 4mm x 6mm QFN package. Each of these packages includes an exposed pad to minimize thermal resistance. Prices start at $3.45 each for the LTC6090 and LTC6090-5, and $6.61 each for the LTC6091 in quantities of 1,000.

The LTC6090 is available in three temperature range grades: 0°C to 70°C, -40°C to 85°C and -40°C to 125°C junction temperature. The LTC6091 is available in -40°C to 85°C and -40°C to 125°C junction temperature grades. For more information, visit www.linear.com/product/LTC6091 and www.linear.com/product/LTC6090.

Summary of Features: LTC6091

  • Supply Range: ±4.75V to ±70V (140V)
  • 0.1Hz to 10Hz Noise: 3.5µVP-P
  • Input Bias Current: 50pA Maximum
  • Low Offset Voltage: 1.25mV Maximum
  • Low Offset Drift: ±5µV/°C Maximum
  • CMRR: 130dB Minimum
  • Rail-to-Rail Output Stage
  • Output Sink & Source: 20mA Minimum
  • 12MHz Gain Bandwidth Product
  • 21V/µs Slew Rate
  • 11nV/?Hz Noise Density
  • Thermal Shutdown
  • 4mm x 6mm 16-Lead QFN Package

Summary of Features: LTC6090-5

    • Supply Range: ±4.75V to ±70V (140V)
    • 0.1Hz to 10Hz Noise: 3.5µVP-P
    • Input Bias Current: 50pA Maximum
    • Low Offset Voltage: 1.25mV Maximum
    • Low Offset Drift: ±5µV/°C Maximum
    • CMRR: 130dB Minimum
    • Rail-to-Rail Output Stage
    • Output Sink & Source: 50mA Minimum
    • 24MHz Gain Bandwidth Product
    • 37V/µs Slew Rate
    • 11nV/?Hz Noise Density
    • Thermal Shutdown
    • Available in Thermally Enhanced SOIC-8E or TSSOP-16E Packages

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 24, 2024
Learn about maskless electron beam lithography and see how Multibeam's industry-first e-beam semiconductor lithography system leverages Synopsys software.The post Synopsys and Multibeam Accelerate Innovation with First Production-Ready E-Beam Lithography System appeared fir...
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

SLM Silicon.da Introduction
Sponsored by Synopsys
In this episode of Chalk Talk, Amelia Dalton and Guy Cortez from Synopsys investigate how Synopsys’ Silicon.da platform can increase engineering productivity and silicon efficiency while providing the tool scalability needed for today’s semiconductor designs. They also walk through the steps involved in a SLM workflow and examine how this open and extensible platform can help you avoid pitfalls in each step of your next IC design.
Dec 6, 2023
18,638 views