industry news
Subscribe Now

Chassis mount supply provides programmable voltage and current down to zero

XP Power today announced the HDS3000 series of 3000 Watt programmable AC/DC power supplies. The series compliments the existing 800 Watt and 1500 Watt versions and comprises seven single output models providing all the popular nominal output voltages from + 12 to + 60 VDC. These highly efficient supplies, up to 93%, allow the output voltage or output current to be programmed from 0 to 105% of nominal output by a variety of means. Digital communication can be made via I2C or RS232 serial interfaces and analog controls include using a 0 to +5 VDC input voltage or by using an external resistor.

An output trim adjustment of +/- 5% of stated nominal via a potentiometer is also provided in order to compensate of wiring losses, or to accommodate a non-standard voltage requirement. An always-on standby output is also available and is user selectable between either 5 VDC / 0.5A or 9 VDC / 0.3A.

Despite its high output power, the HDS3000 has a high power density and is packaged in a chassis mount format measuring only 14.7 x 5.0 x 5.0 inches (360.0 x 127.0 x 127.0 mm) including the bus bar output connectors and the variable speed fan. Using a variable speed fan helps keep energy consumption to a minimum, reduces acoustic noise when operating at low load conditions, and extends the lifetime of the fan.

Signal and other control functions include Remote On/Off, AC OK, remote sense and overtemperature shutdown. Up to five supplies can be configured in parallel to provide a current share capability for increasing available power output or to build in redundancy into the end-system. A multicolour LED is used to indicate power supply operational status through a combination of colour and flashing or constant illumination.

With its universal input range of 90 – 264 VAC the HDS3000 is suitable for worldwide use. There is no derating until below 100 VAC. The supply complies with the internationally recognized UL/EN609501-1 safety standard for IT equipment and also meets Class A conducted and radiated EMI criteria as stipulated by EN55022.

The HDS3000 series is priced at $936 for 500 pcs orders and is available from Newark, Digi-Key, or direct from XP Power and come with a 3 year warranty.

Leave a Reply

featured blogs
Apr 24, 2024
Learn about maskless electron beam lithography and see how Multibeam's industry-first e-beam semiconductor lithography system leverages Synopsys software.The post Synopsys and Multibeam Accelerate Innovation with First Production-Ready E-Beam Lithography System appeared fir...
Apr 24, 2024
Diversity, equity, and inclusion (DEI) are not just words but values that are exemplified through our culture at Cadence. In the DEI@Cadence blog series, you'll find a community where employees share their perspectives and experiences. By providing a glimpse of their personal...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Electromagnetic Compatibility (EMC) Gasket Design Considerations
Electromagnetic interference can cause a variety of costly issues and can be avoided with a robust EMI shielding solution. In this episode of Chalk Talk, Amelia Dalton chats with Sam Robinson from TE Connectivity about the role that EMC gaskets play in EMI shielding, how compression can affect EMI shielding, and how TE Connectivity can help you solve your EMI shielding needs in your next design.
Aug 30, 2023
28,755 views