industry news
Subscribe Now

Innovasic Certifies RapID Platform for PROFINET IRT

Hannover Fair, April 2014 – Within a one month of announcing the newest version of its RapID Platform Network Interface for PROFINET RT and IRT connectivity, Innovasic has certified the solution for both Class B and Class C.  It is possible to design in PROFINET with the RapID Platform now and take advantage of seamless support for version v2.3.  Innovasic’s solution allows users to certify their design to v2.3 as soon as certification is available through any of the PI Test Labs.

The PROFINET IRT Network Interface is delivered as a module or embedded design containing everything needed to participate in a PROFINET IRT and RT network.  A host processor connects to the Network Interface via a UART or 16-bit Parallel Interface.  At the software layer, the host connects to Innovasic’s Unified Interface API so other protocols can be used without changing host processor software.  Since the Unified Interface is exactly the same across all versions of the RapID Platform, customers developing a PROFINET IRT or RT product can easily convert to any other supported Industrial Ethernet protocol.

“This is a momentous occasion for Innovasic,” says Keith Prettyjohns, Innovasic’s CEO, “and speaks to the power of our new fido5000, Real-time Ethernet Multi-protocol (REM) switch and the openness of the PROFINET standard.”

The RapID Platform – PROFINET IRT Network Interface module and embedded design are available in April 2014.  Please visit us at www.innovasic.com to learn more. 

Innovasic

Innovasic provides extended life semiconductor solutions for customers who have products with long life-cycles.  The company’s processors, communication controllers and mixed signal devices are key components in industrial automation equipment, transportation systems, instrumentation, and medical devices.  Innovasic’s real-time Industrial Ethernet solutions quickly integrate into automation devices at the highest performance and the lowest cost.  Extending the life of its customers’ products has established Innovasic as a trusted partner and an approved supplier to leading electronic system manufacturers worldwide.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

FlyOver® Technology: Twinax FlyOver® System for Next Gen Speeds -- Samtec and Mouser
Sponsored by Mouser Electronics and Samtec
In this episode of Chalk Talk, Amelia Dalton and Matthew Burns from Samtec investigate the challenges of routing high speed data over lossy PCBs. They also discuss the benefits that Samtec’s Flyover® cable assembly systems bring to data center and embedded designs and how Samtec is furthering innovation with their high speed interconnect solutions. 
Apr 15, 2024
698 views