industry news
Subscribe Now

Economical Three-Dimension Magnetometer Sensor with Magnetic Interference Immunity

Fairport, NY, USA: Saelig Company, Inc. – (www.saelig.com)  has announced the IST8303 – a single-chip 3-axis digital magnetometer sensor, housed in an extremely small form factor (1.6 x 1.6 x 1.0mm) 12-pin BGA package, making it ideal for high-volume surface-mount portable products. The IST8303 is an integrated chip containing 3-axis magnetic sensors with an ASIC controller. The IST8303 outputs 14/16-bit data over a wide magnetic field range (+/- 1600uT) in a fast-mode 400kHz I2C digital output. 

Since the host processor does not need to continuously read data from the sensor, the FIFO’s “wake up only as needed” operation allows consistent system-power savings. Functioning on 1.8V with a standby current of less than 10uA, very long battery life can be achieved in many portable applications. The IST8303 has three operation modes: stand-by, single measurement – followed by standby, and continuous measurement, where the sensors are measured periodically at a preset frequency. An interrupt function is employed to detect the occurrence of extraordinary external magnetic fields: when the measured output value exceeds 16 Gauss, the INT register is enabled. The output register contains X, Y, Z axis measurement data stored as two’s complement data.

Designed in 0.18um technology, the IST8303 features anti-offset and anti-temperature, eliminating errors caused by temperature and factory mismatch. The built-in temperature sensor (-20degC to +85degC) allows for calibration-free designs unaffected by external interference: auto zero-drift eliminates errors from external magnetic sources. No more wrong tags on mobile phone and tablet images!

Hardly bigger than a large grain of salt, the IST8303 is suited to a wide range of portable motion-sensing products such as consumer electronics, digital compasses, GPS/pedestrian navigation, augmented reality applications, magnetometer products, etc.

Costing far less than competitive products, iSentek’s IST8303 – already designed into some mass-produced mobile phones and Windows 8 tablets – represents the best performance/cost solution available for smart phones, tablets, gaming devices, digital compasses, GPS navigation, and augmented-reality applications. Designed and made in Taiwan by fabless MEMS IC design houseiSentek, the IST8303 is available now from Saelig Company Inc. their North American distributor. Software and algorithm support and evaluation boards are also available. For detailed specifications, free technical assistance, or additional information, please contact Saelig at 888-7SAELIG, via email: info@saelig.com, or visit www.saelig.com. 

About Saelig Company Inc.

Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing reputation for finding and sourcing remarkable, unique test and measurement and control products and components for use in a wide variety of industries. Products lines are continuously added from sources across the globe, and are offered at competitive prices, accompanied by full in-house technical support, exceptional customer service, and fast delivery. For full details of available product lines, please visit www.saelig.com

Leave a Reply

featured blogs
Mar 29, 2024
By Mark Williams, Sr Software Engineering Group Director Translator: Masaru Yasukawa 差動アンプはã1つの入力信号ではなく2つの入力信号間の差にゲインをé...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Electrical Connectors for Hermetically Sealed Applications
Sponsored by Mouser Electronics and Bel
Many hermetic chambers today require electrical pathways to provide internal equipment with power, data or signals, or to receive data and signals from equipment within the chamber. In this episode of Chalk Talk, Amelia Dalton and Brad Taras from Cinch Connectivity Solutions explore the role that seals and connectors play in the performance of hermetic chambers. They examine the methodologies to determine hermetic seal leaks, the benefits of epoxy hermetic seals, and how Cinch Connectivity’s epoxy-based seals and hermetic connectors can add value to your next design.
Aug 22, 2023
26,419 views