industry news
Subscribe Now

45V 500mA LDO Offers 25µVRMS Noise, Programmable Current Limit & Power Good

MILPITAS, CA – January 27, 2014 – Linear Technology Corporation announces the LT3065, a high voltage, low noise, low dropout voltage linear regulator offering precision, programmable current limit and a power good flag. The device delivers up to 500mA output current with a 300mV dropout voltage at full load. It features a wide 1.8V to 45V input voltage range and output voltage is adjustable from 0.6V to 40V. A single REF/BYP pin capacitor provides low noise operation-only 25µVRMS across a 10Hz to 100kHz bandwidth, and also reference soft-start functionality, preventing output voltage overshoot at turn-on. Output voltage tolerance is highly accurate at ±2% over line, load and temperature.

The LT3065 operates with a very small, low cost, 3.3µF ceramic output capacitor, optimizing stability and transient response. The LT3065 PWRGD flag indicates output regulation. One resistor programs the external precision current limit (±10% over temperature). Moreover, the device’s internal protection circuitry includes reverse-battery protection, reverse-output protection, reverse-current protection, current limit with foldback, and thermal limiting. The device’s wide input and output voltage ranges, fast transient response, low quiescent current of 55µA (operating) and <1µA (in shutdown) make it an excellent choice for industrial power supplies, avionic power supplies, automotive power supplies, battery-powered systems and instruments requiring optimum run time, and high reliability power supplies requiring more extensive protection.

The LT3065 is available in thermally enhanced 10-lead 3mm x 3mm DFN and 12-lead MSOP packages, both with a compact footprint. The E- and I-grade versions are available from stock with an operating junction temperature of -40°C to +125°C, H grade is rated from -40°C to +150°C, and the MP-grade version is specified from -55 to +150°C. 1,000 piece pricing starts at $1.85 each for the E-grade. For more information, visit www.linear.com/product/LT3065.

Summary of Features: LT3065

  • Output Current: 500mA
  • Dropout Voltage: 300mV
  • Input Voltage Range:
    1.8V to 45V
  • Programmable Precision Current Limit: ±10%
  • Low Quiescent Current: 55µA
  • Power Good Flag
  • Low Noise: 25µVRMS (10Hz to 100kHz)
  • Adjustable Output Voltage:
    0.6V to 40V
  • Single Capacitor Soft-Starts Reference & Lowers Output Noise
  • Output Tolerance: ±2% Over Line, Load & Temperature
  • Stable with Low ESR, Ceramic Output Capacitors (3.3µF minimum)
  • Current Limit Foldback Protection
  • Shutdown Current: <1µA
  • Reverse Battery & Thermal Limit Protection
  • 10-Lead 3mm x 3mm DFN & 12-Lead MSOP Packages

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Maximizing High Power Density and Efficiency in EV-Charging Applications
Sponsored by Mouser Electronics and Infineon
In this episode of Chalk Talk, Amelia Dalton and Daniel Dalpiaz from Infineon talk about trends in the greater electrical vehicle charging landscape, typical block diagram components, and tradeoffs between discrete devices versus power modules. They also discuss choices between IGBT’s and Silicon Carbide, the advantages of advanced packaging techniques in both power discrete and power module solutions, and how reliability is increasingly important due to demands for more charging cycles per day.
Dec 18, 2023
16,873 views