fresh bytes
Subscribe Now

This LEGO microscope actually works

legomicro.jpg

This working Lego microscope was built by Carl Merriman, a Lego artist who’s been building for over 27 years. It’s sleek, functional and even though you couldn’t use it to study Ebola or the T-Virus, it’s still a pretty sweet piece of kit.

The build was inspired by Lego X-Pod sets (now discontinued):

While trying to find a use for the pod itself, I realized that it was very close to a deep petri dish. I used a planetary gear system to allow both coarse and fine adjustment of the objective “lens”. A little more tinkering and I connected the focus to a magnifying glass and fiber optic light in the eyepiece, so adjusting the focus knobs would actually bring the writing on a LEGO stud in and out of focus.
via Gizmodo

Continue reading 

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Achieving Reliable Wireless IoT
Wireless connectivity is one of the most important aspects of any IoT design. In this episode of Chalk Talk, Amelia Dalton and Brandon Oakes from CEL discuss the best practices for achieving reliable wireless connectivity for IoT. They examine the challenges of IoT wireless connectivity, the factors engineers should keep in mind when choosing a wireless solution, and how you can utilize CEL wireless connectivity technologies in your next design.
Nov 28, 2023
19,262 views