EEJournal

fresh bytes
Subscribe Now
September 10, 2014

Cliff House, a five-story house that hangs off the edge of a cliff

by Larra Morris

External-Concept-Image-02777.jpg

Cliff House is a design concept for a five-story home that hangs off the face of a cliff. Entry to the modular structure is through the top floor garage, and the house is anchored to the cliff by steel pins. The Cliff House concept was designed by Modscape, an Australian company that specializes in prefabricated structures.
via Laughing Squid

Cross-Section-Reduced-Centre.jpg

Continue reading

Images: Modscape

Leave a Reply

featured blogs
One Robotic Step Closer to Humanoid Robots in the Home
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
More from Max's Cool Beans...
Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....
More from Synopsys...
Rapid Prototyping of Analog Circuits with Verilog-A Modeling
Apr 18, 2024
Analog Behavioral Modeling involves creating models that mimic a desired external circuit behavior at a block level rather than simply reproducing individual transistor characteristics. One of the significant benefits of using models is that they reduce the simulation time. V...
More from Cadence...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured chalk talk

FlyOver® Technology: Twinax FlyOver® System for Next Gen Speeds -- Samtec and Mouser
Sponsored by Mouser Electronics and Samtec
In this episode of Chalk Talk, Amelia Dalton and Matthew Burns from Samtec investigate the challenges of routing high speed data over lossy PCBs. They also discuss the benefits that Samtec’s Flyover® cable assembly systems bring to data center and embedded designs and how Samtec is furthering innovation with their high speed interconnect solutions. 
Click here for more information about Samtec Flyover® Cable Assembly Systems
Apr 15, 2024
558 views